Camera Adjustments - Cisco TelePresence Series User Manual

Cisco TelePresence System Profile Series, Codec C Series, Quick Set C20, SX20 Quick Set, MX200, MX300
Table of Contents

Camera adjustments

You may want to adjust the zoom and pan (which
direction it points) of the camera.
Once you activate the camera control menu, the
self-view (see also the previous page) is switched on
automatically.
In addition you may also adjust the whitebalance
and compensate for any light behind you (backlight
compensation). These topics are discussed in
Camera Control & Settings on page
Pan
Tilt
Zoom
D14582.09 User guide Profile Series, Codec C Series, Quick Set C20, SX20 Quick Set, MX200, MX300
All contents are copyright © 2010–2013 Cisco Systems, Inc. All rights reserved. Version TC6.0, 01.2013
Getting started Video meetings
36.
Adjust zoom
in and out
Scheduled meetings
Tap Camera to invoke
the Camera menu.
here.
Use these controls to
define the direction
in which the camera
shall point (also known
as Pan control).
7
Managing Contacts The Settings
Then tap Show camera controls,
as outlined.
To exit this menu, putting
changes into effect, tap
anywhere outside the
menu.
User guide
www.cisco.com