Emc Resilience Mode - Cisco C20 User Manual

Cisco TelePresence System Profile Series, Codec C Series, Quick Set C20, SX20 Quick Set, MX200, MX300

EMC Resilience Mode

If the Touch controller is used in environments with
considerable amounts of electromagnetic noise
present, you may experience an appearance of false
signals—as if someone tapped the Touch controller
when obviously nobody did so.
To cope with this you may set the EMC Resilience
Mode to On. You must then press and hold for a
little while, rather than just tap, in order to make the
system aware of your tapping. This will prevent the
appearance of false signals.
D14582.15R1 (Rev.1 Nov 2013) User guide Profile Series, Codec C Series, Quick Set C20, SX20 Quick Set,
MX200, MX300. All contents are copyright © 2010–2013 Cisco Systems, Inc. Version TC6.2, 06.2013. English
Settings > Administrator Settings > EMC Resilience Mode
This menu is inside the Administrator Settings.
Tap Back to leave the Administrator Settings
51
and tap Exit to leave all settings.
User guide
www.cisco.com