Related Manuals for Draytek VigorSwitch P1085
Summary of Contents for Draytek VigorSwitch P1085
- Page 2 VigorSwitch P1085/G1085 Web Smart Gigabit Switch Quick Start Guide Version: 1.1 Firmware Version: V2.5.1 (For future update, please visit DrayTek web site) Date: December 25, 2019...
- Page 3 Intellectual Property Rights (IPR) Information © All rights reserved. This publication contains information that is protected Copyrights by copyright. No part may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language without written permission from the copyright holders. The following trademarks are used in this document: Trademarks ...
-
Page 4: Eu Declaration Of Conformity
EU Declaration of Conformity We DrayTek Corp. , office at No.26, Fu Shing Road, HuKou County, Hsin-Chu Industry Park, Hsinchu 300, Taiwan , R.O.C., declare under our sole responsibility that the product Product name: 8 GbE Ports PoE Switch ... - Page 5 EU Declaration of Conformity We DrayTek Corp. , office at No.26, Fu Shing Road, HuKou County, Hsin-Chu Industry Park, Hsinchu 300, Taiwan , R.O.C., declare under our sole responsibility that the product Product name: 8 GbE Ports Switch Model number: VigorSwitch G1085 ...
-
Page 6: Regulatory Information
ZIP Code 75234 E-mail rmesser@abptech.com Representative Contact Person Mr. Robert Tel. 19728311600 Messer Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. More update, please visit www.draytek.com. - Page 7 Web registration is preferred. You can register your Vigor switch via http://www.draytek.com. Firmware & Tools Updates Due to the continuous evolution of DrayTek technology, all switches will be regularly upgraded. Please consult the DrayTek web site for more information on newest firmware, tools and...
- Page 8 The web smart gigabit ports switch is a standard switch that meets both IEEE 802.3u/ab Fast Ethernet and Gigabit Ethernet specifications. The network administrator can logon the switch to monitor, configure and control each port’s activity. In addition, the switch implements the QoS (Quality of Service) and VLAN.
- Page 9 PoE for Port 1 to Port 8 RJ45 LNK/ACT Port 1 to Port 8 Status Explanation PoE/Alert Devices connected over the PoE maximum power budget. (for P1085) Blinking More than 80% of maximum power budget is supplied for PoE device(s). Devices connected within the PoE maximum power budget.
- Page 10 Power inlet for AC input (100~240V/AC, 50/60Hz). Note The following limitation is suitable for VigorSwitch P1085 Power Output -- IEEE 802.3af Max. 15.4W Output Supported IEEE 802.3at Max. 30W Output Supported PoE Power Budget –- 140 Watts (Max) ...
- Page 11 The switch will supply power to PoE Device over the twisted-pair cable. Please note that Power Device must comply with IEEE 802.3af/at. Other PCs, servers and network devices can be connected to the switch using a standard ‘straight through’ twisted pair cable. (Take VigorSwitch P1085 as an example.)
- Page 12 After the bracket installation, the VigorSwitch’s chassis can be installed in a rack by using four screws for each side of the rack. (Take VigorSwitch P1085 as an example.)
- Page 13 In this section, we take VigorSwitch P1085 as an example: Before using the switch, perform the following steps: 1. Set up a physical path between the configured the switch and a PC by a qualified UTP Cat. 5e cable with RJ-45 connector.
- Page 14 The home page of VigorSwitch will be shown as below:...
- Page 15 This DrayTek product uses software partially or completely licensed under the terms of the GNU GENERAL PUBLIC LICENSE. The author of the software does not provide any warranty. A Limited Warranty is offered on DrayTek products. This Limited Warranty does not cover any software applications or programs.