Table of Contents
Advertisement
Parameter description:
Prioritize Traffic
Port Number
DSCP Value
Priority
3
.
6
.
2
R
a
t
e
L
i
m
3
.
6
.
2
R
a
t
e
L
i
m
Function name:
Rate Limit Configuration
Function description:
Ingress and Egress Bandwidth Setting function are used to set up the limit of Ingress or
Egress bandwidth for each port.
VigorSwitch G1240 User's Guide
Five Prioritize Traffic values are provided: User Defined,
All Low Priority, All Normal Priority, All Medium
Priority, and All High Priority.
The QoS setting would apply to all ports on the switch if
one of the following values is selected: All Low Priority,
All Normal Priority, All Medium Priority, or All High
Priority.
When Custom is selected for Prioritize Traffic, you may
assign specific Port Number for 802.1p Configuration.
64 kinds of priority traffic as mentioned above, user can
set up any of Queue (low, normal, medium, high). In
default, Priority 0~63 are mapping to High.
i
t
i
t
55
Advertisement
Table of Contents
