NETGEAR 341U Sprint User Manual page 51

WARNING: If you reset the software to default settings, you must go through the device setup, as if
you've just purchased the device. See Starting Your Device for the First Time.
You can reset the device to factory settings from the NETGEAR 341U Manager's Software and
Reset page.
Note: You can only do a factory reset of your device with Sprint's assistance. Contact Sprint
Customer Service to obtain an MSL code that you will need to enter to perform the reset.
1. Contact Sprint Customer Service to obtain an MSL code and your device's PIN code, if needed.
2. Log in to the home page. (See Logging In as an Administrator.)
3. Click Settings > General > Software and Reset.
4. Below Factory Reset, click Reset.
5. Enter the MSL code provided by Sprint, then click Submit.
6. Click Begin Reset.
Software and Reset 46