Item
Roaming Guard
Update PRL
Update Network
Settings
Manual
Configuration
Advanced Settings Use only when instructed by Sprint.
Network > APN (Access Point Name) Tab
To connect to a carrier's network when roaming, the device must be configured with an Access Point
Name (APN) for that carrier. The APN is checked by the carrier to determine the type of network
connection to establish.
Note: Your NETGEAR 341U USB Modem comes with the APN for Sprint preconfigured.
In this tab, you can add (or modify) APNs for the networks you want to connect to.
1. Log in to the home page. (See Logging In as an Administrator.)
2. Click Settings > Network > A PN.
To add (or modify) an APN, see Configuring Access Point Names.
The list of all APNs that have been set up includes the following information.
NETGEAR 341U Manager Interface
If selected, the roaming areas where a warning will appear when you enter
them. See Enabling / Disabling the Roaming Guard Warning Message.
Click to check if a new PRL (Preferred Roaming List) is available on the
network, and use it to update your device.
Click to re-run HFA (Hands Free Activation).
Use only when instructed by Sprint.
Description
28