External Antennas; Alerts - NETGEAR 341U Sprint User Manual

External Antennas

Your NETGEAR 341U USB Modem supports the use of external MIMO antennas via two antenna
connectors on the top edge of the device.
Important: If you choose to use external antennas, you must connect MIMO antennas to both
antenna connectors, otherwise the device will not function correctly. Only antennas approved by
NETGEAR for use with the NETGEAR 341U USB Modem are supported.
To connect external antennas:
1. Remove the back cover of the device.
2. Pull back the antenna connector covers and insert both of the antennas.
3. Replace the back cover.

Alerts

Alerts notify you about situations that require your attention and suggest the actions you need to take
to resolve them.
Some of the alerts you may encounter include:
SIM issues (SIM error, PIN locked, MEP locked, not installed)
n
Roam Guard
n
Mobile Broadband disconnected (Connection error)
n
Add more data
n
Downloading and Installing Firmware
n
Airplane mode
n
Temperature error
n
Device Basics 9