Notes On Moisture Condensation - Honeywell H.264 HRDP User Manual

Notes on Moisture Condensation

______________________________________________________________________________________________
Document 800-06801 Rev B
06/10
Moisture condensation could damage the DVR. Read the following
information carefully.
Moisture condensation might occur under the following circumstances:
•
When this product is brought directly from a cool location to a
warm location.
•
When this product is moved to a hot and humid location from a
cool location.
•
When this product is moved to a cool and humid location from a
warm location.
•
When this product is used in a room where the temperature
fluctuates.
•
When this product is used near an air-conditioning unit vent
•
When this product is used in a humid place.
Do not use the DVR when moisture condensation may occur.
If the DVR is used in such a situation, it may damage discs and internal
parts. Remove any CD discs, connect the power cord of the DVR to the wall
outlet, turn on the DVR, and leave it for two to three hours. After two to three
hours, the DVR will warm up and evaporate any moisture. Keep the DVR
connected to the wall outlet and moisture will seldom occur.
Performance Series DVR User Guide
9