Performing A Basic Search; Status Search; Performing A Status Search; Clean Image - Honeywell H.264 HRDP User Manual

Performing a Basic Search

Status Search

Cameras

Performing a Status Search

Clean Image

______________________________________________________________________________________________
Document 800-06801 Rev B
06/10
1. Click Select Date to open the calendar and select a date.
2. Select a time using the hour and minute control bars.
3. Select one or more cameras.
4. Click Play. (Video can be played forwards, backwards, or frame-by-
frame.)
The Status Search option displays a timeline in graph format. Scroll through
multiple cameras and easily locate hours with recorded video.
24 Hours (0-23) AM & PM
1. In Search mode, click Status.
2. Click Select Date to open the calendar and select a date.
3. Click along the orange recorded video block to select a desired camera
or time frame.
4. After locating the desired video, close the Status Search window and
use the playback controls to play forward, reverse or frame-by-frame.
The Performance Series DVR can record video using one of three different
resolutions. When using the 704 x 480 resolution, two fields are mixed.
Because of the timing gap between the two fields, according to the
standardized image rules, after image might occur to high speed moving
images. The HRDP DVR allows the user to remove this by clicking Clean
Image.
Performance Series DVR User Guide
Recorded video displayed in Orange
91