E-Mail Configuration - Honeywell H.264 HRDP User Manual

Setup

E-mail Configuration

______________________________________________________________________________________________
54
The DVR can send an email notification to up to six defined e-mail
addresses when an event happens.
E-MAIL SERVER – DVR/SMTP [Configure the DVR to use selected e-mail
server.]
OPTION –Define the type of event that will trigger an e-mail notification.
MOTION – After a motion alarm is triggered.
SENSOR – After a sensor alarm is triggered.
VIDEO LOSS – After video loss on a camera
POWER – When the DVR is shutdown and restarted.
SETUP – When a user accesses Setup.
LOG IN – When a user logs in.
LOGIN FAIL – After one failed login attempt.
DISK FULL – When the HDD reaches the user-defined maximum
disk full percentage. See DISK MANAGEMENT – OVERWRITE.
SMART – When the HDD reaches the user-defined maximum
temperature. See DISK MANAGEMENT – SMART.
PIC – ON / OFF [Enable to send a picture of the event.]
E-MAIL ADDRESS – Enter the e-mail address.