Troubleshooting; General Tips; Lcd Is Dark; Insufficient Signal Strength - NETGEAR Zing User Manual

Troubleshooting

Learn about various troubleshooting tips, and what to do when a specific message is displayed.

General Tips

Here are some general tips to get you started.
●
If some settings are preventing you from connecting to Wi-Fi, connect to your device
through the micro-USB cable, and then change the settings. (See
USB.)
●
Contact your wireless provider for assistance.
●
The knowledge base at the NETGEAR website (support.netgear.com) may also be
useful.

LCD Is Dark

The following table describes situations that can cause the LCD to be dark (that is, not
displaying any text or icons), and recommends actions.
Device state LCD state
On, but dormant (inactivity
On
timeout)
Off Off
If the LCD is still dark, use the micro-USB cable to connect your device to the AC charger or to
a computer.

Insufficient Signal Strength

If you have insufficient signal strength, an icon is displayed on your device's home screen, and
on the web page's Connection Details section.
Insufficient signal strength, indicated by
●
You are outside network coverage areas.
● Your device's internal antenna is pointing in the wrong direction.
Troubleshooting
Your action
Briefly press the power button on your
device.
Turn your device on:
Make sure a battery is inserted into your
device.
Press the power button on your device
until your device turns on.
, may occur because:
Connecting Through
137