Clearing Account Details Only; Resetting Device Settings Only - NETGEAR Zing User Manual

Clearing Account Details Only

If you want to use your device with another account, you need to clear your current account.
You can clear these settings from your device's Reset screen, or from the Zing Manager's
Software and Reset page.
Note: All connected devices will be disconnected and your device will reboot automatically.
You will have to activate your device with your new account before they can reconnect.
On the Touchscreen
1. Tap > Settings > Reset.
2. Tap Clear Programming.
3. Tap Continue Reset.
4. Tap Begin Reset.
In the Zing Manager (via the hotspot URL)
1. Log in to the home page. (See
2. Click Settings > General > Software and Reset.
3. Below Clear Programming, click Reset.
4. Click Begin Reset.

Resetting Device Settings Only

If you want to reset your device to its default behavior, but don't want to change your account or
network activation, you need to reset your device settings.
You can reset these settings from your device's Reset screen, or from the Zing Manager's
Software and Reset page.
Note: All connected devices will be disconnected and your device will reboot automatically.
After the reset finishes, they can reconnect.
On the Touchscreen
1. Tap > Settings > Reset.
2. Tap Settings Reset.
3. Tap Continue Reset.
4. Tap Begin Reset.
Software and Reset
Logging In as an Administrator.)
109