Battery Information And Settings - NETGEAR Zing User Manual

prevent a computer shutdown. You can continue with your work. To prevent this
message from being displayed, install the device driver.
1. Make sure your computer is turned on.
2. Insert the larger (Type A) end of the micro-USB cable into your computer.
3. Insert the other end of the cable into the micro-USB port on the side of your device.
While your device is charging, the LCD (and the Zing Manager home page, if your device is on)
shows:
 If your device is on –
 If your device is off –
message "Charging..."
When your device is fully charged, the LCD (and the Zing Manager home page, if your device is
on) shows:
 If your device is on –
remove power.". Tap the 'X' to close the message.
 If your device is off –
remove power." Tap the 'X' to close the message.

Battery Information and Settings

The battery icon indicates the state of the battery of your device.
The text next to the icon indicates the remaining charge.
The icon appears on your device's home screen and in the web page's Connection Details
panel.
Icon Description
Battery is charged (26%-100%).
Battery level is low (11-25%). Charge your device. (See
Battery level is critical (<10%). Charge your device immediately. (See
Charging the
Charging through the AC charger or computer.
Device Basics
and the percentage charged (for example, "92%")
, the percentage charged (for example, "92%"), and the
and the message "Battery is Fully charged. Please
and the message "Battery is Fully charged. Please
Battery)
Charging the Battery)
13