Ptz Setup - Honeywell HSVR-16 User Manual

PTZ Setup

Boot up the DVR, and input the user name and password.
In the main menu, select Setting Pan/Tilt/Zoom. The interface is shown as in
Figure
•
•
•
•
•
•
•
Figure 4-27 PTZ Setup Menu
After completing all the setting click Save.
In single window display (View 1) mode, right-click to open the interface shown in
Figure 4-28
menu with only Pan/Tilt/Zoom and Color Setting options). .
The camera video should be in the current screen. Before
setup, check whether the following connections are right:
• PTZ and decoder connection is right. Decoder address setup
Note
is right.
• Decoder A (RS485 +) / B (RS485 -) line connects with DVR
A/B line.
4-27. Here you can set the following items:
Channel: Select the channel connected with the speed dome video port .
Protocol: Select the corresponding PTZ protocol (such as PELCOD)
Address: Identical to the device address set in the speed dome. Default
address is 1.
Baud rate: Select corresponding baud rate. 2400 for Pelco-D protocol.
Data bits: Select corresponding data bits. Default value is 8.
Stop bits: Select corresponding stop bits. Default value is 1.
Parity: There are three options: Odd/Even/None. The default value is None.
(clicking Fn in the front panel or in the remote controller will pop up a
Honeywell
35