Honeywell HSVR-16 User Manual page 35

•
Show message: System can pop up a message to alarm you in the local host
screen if you enabled this function.
•
Send email: System can send out email to alert you when alarm occurs.
•
PTZ activation: Here you can set PTZ movement (of any video channels) such
as going to a preset when motion is detected in current video channel. Click
Select, and you can see an interface is shown as in
•
Period: Click Set to set the period for the channel to be armed for motion
detection, you can see an interface is shown as in
set for business day and non-business day. In
can see an interface is shown as in
business day and non-business day.
•
Alarm output: When motion detection occurred, system enables peripheral
alarm devices.
•
Tour: Here you can enable tour function when alarm occurs. It is a one-
window tour. Please go to chapter 5.3.9 Display for tour interval setup.
If there're record channels selected, only the record channels
Note
will be displayed in the tour.
Highlight icon to select the corresponding function. After all the settings, click
Save, and the system goes back to the previous menu.
In
Figure
region for motion detection. Click Fn to switch between
Note
arm/withdraw motion detection. After setting, click enter button
to exit.
Figure 4-13 Motion Detection Menu
Figure
4-14, you can left click mouse and then drag it to set a
Figure 4-15.
4-16. Here you can
Figure
4-16, click Set, and you
Figure
4-17. Here you can set your own
Honeywell
27