Honeywell HSVR-16 User Manual page 97

Figure 6-36 The NAS Setup Menu
Please refer to the following sheet for detailed information.
Parameter
NAS enable
Server IP
Port
User Name
File length
Password
Remote Path
Save
Refresh
NTP
The NTP interface is shown in
Here you can realize network time synchronization. Please enable current function
and then input server IP, port number, time zone and update interval.
Function
Please select network storage protocol and then enable NAS
function.
Input remote storage server IP address.
Input Remote storage server-port number.
Log in user account.
The file length you upload to the FTP.
When setup is larger than the actual file length, system will upload
the whole file. When setup here is smaller than the actual file
length, the system only uploads the set length and auto ignore the
left section. When interval value is 0, system uploads all
corresponding files.
The password you need to log in the server.
Remote storage file path.
You can click Save after you complete setup for one channel, or
you can complete the whole setups and then click save button.
Click this button to get device latest configuration information.
Figure 6-37.
Honeywell
89