Honeywell HSVR-16 User Manual page 90

Figure 6-28 The Color Setting Menu
Please refer to the following table for detailed information.
82
Parameter Function
Channel Here is for you to select a monitor channel.
Channel Name Here is to display current channel name. You can modify it.
Compression H.264
It includes main stream, motion stream and alarm stream. You can select
different encode frame rates form different recorded events.
System supports active control frame function (ACF). It allows you to record
Main Stream in different frame rates.
For example, you can use high frame rate to record important events,
record scheduled event in lower frame rate and it allows you to set different
frame rates for motion detection record and alarm record.
Extra Stream Select extra stream if you enabled the extension stream to monitor.
Recorded file only contains video by default. You need to draw a circle here
Audio/Video
to enable audio function.
For 16ch series:
Main stream of channel 1 and channel 9 support D1/CIF/QCIF.
Resolution
Main stream of channel 2 to 8 and channel 10 to 16 support CIF only.
Extra stream of channel 1 to channel 16 support QCIF only.
Frame Rate PAL：1～25f/s；NTSC：1～30f/s
There are two options: VBR and CBR.
Bit Rate Type
Please note, you can set video quality in VBR mode only.
Quality The value ranges from 1 to 6. The level 6 is the best video quality.
In CBR mode, actual bit rate is limited by this value
Bit Rate The value only affect average bit rate in VBR mode.
Please refer to recommend bit rate for the detailed information.
Recommended Recommended bit rate value according to the resolution and frame rate you
Bit Rate have set.
Here you can set video brightness, contrastness, hue, saturation and gain.
Color Setting
The value ranges from 0 to 100.Default value is 50. See Figure 7-27.
Here you can privacy mask the specified video in the monitor video.
Cover area
(privacy mask)
System max supports 4 privacy mask zones.
You can enable this function so that system overlays time information in
video window.
Time Title
OSD transparent value is not applicable in current DVR version.
You can use the mouse to drag the time tilte position.
Honeywell