Ptz Setup; Figure 4-34 Ptz Setting - Honeywell CADVR-04D User Manual

PTZ Setup

Note: The camera video should be in the current screen. Before
setup, please check the following connections are right:
PTZ and decoder connection is right. Decoder address setup is
right.
Decoder A (B) line connects with DVR A (B) line.
Boot up the DVR, input user name and password.
In the main menu, click setting, and then click Pan/Tilt Control button.
The interface is shown as in
following items:
Channel: select the current camera channel.
Protocol: select corresponding PTZ protocol(such as PELCOD)
Address: default address is 1.
Baud rate: select corresponding baud rate. Default value is 9600.
Data bits: select corresponding data bits. Default value is 8.
Stop bits: select corresponding stop bits. Default value is 1.
Parity: there are three options: odd/even/none. Default setup is
none.

Figure 4-34 PTZ Setting

. Here you can set the
F igure 4-34
7 1 5 H
62