Figure 4-31 Function Menu
Preset Setup
In
In
preset.
Now you can add this preset to one tour.
Figure 4-32 Preset Setup
Activate Preset
In
38
Preset, tour and pattern all need the value to be the control
•
parameter. You can define it as you require.
You need to refer to your speed dome user's manual for
•
Note
auxiliary function definition. In some cases, it can be used for
special process.
The following setups are usually performed in the interfaces
•
shown in
4-29, use eight direction arrows to adjust camera to the proper position.
Figure
4-30, click Preset and input the preset number. Clicking Set will save the
Figure
4-31, input the preset number in the "No." field, and click Preset.
Figure
Figure
4-29,
Figure 4-30
Honeywell
and
Figure
4-31.