Figure 6-39 The Detection Setup Menu
Figure 6-40 The Detection Zone Setup
Please refer to the following sheet for detailed information.
92
Parameter
Function
Event Type
There are three types: Motion detection/video loss/Camera Masking.
Channel
Select channel name from the dropdown list.
Enable
You need to draw a circle to enable motion detection function.
Sensitivity
There are six levels. The sixth level has the highest sensitivity.
There are six levels. The sixth level has the highest sensitivity.
Region: If you select motion detection type, you can click this button to set
Region
motion detection zone. The interface is shown in
22X18/NTSC 22X15 zones. Right-click and you can go to the full-screen display
mode. Do remember to click OK to save your motion detection zone setup.
Honeywell
6-40. There are PAL
Figure