Linksys SPA941 Administration Manual page 61

2
Interdigit Short Timer
Notes:
1. The interdigit timer values are used as defaults when dialing. The Interdigit_Long_Timer is used after
any one digit, if all valid matching sequences in the dial plan are incomplete as dialed. The
Interdigit_Short_Timer is used after any one digit, if at least one matching sequence is complete as
dialed, but more dialed digits would match other as yet incomplete sequences.
© 2003 - 2005 Linksys, a Division of Cisco Systems
Short timeout between entering digits when dialing.
Range: 0 – 64 sec
Time0
Proprietary (See Copyright Notice on Page 2)
DRAFT
3
61