Entering And Saving Settings - Linksys SPA941 Administration Manual

The user can copy an existing directory entry to create a new entry. To do this, high light the entry you
want to copy and press SK(copy). Then high light the "New Entry" option and press SK(paste). The user
can edit the new entry and then press SK(save) to save the entry.
The user can also save a call log entry into the directory. To do this, select a call log entry and press
SK(save). Then edit the entry if needed, and then press SK(save) to save the new entry in the directory.

Entering and Saving Settings

The SPA941 GUI allows the user to enter alphanumeric and numeric inputs will ease. The following data
types may be entered into the phone:
•
Numeric String, such as a phone number when dialing
•
Alphanumeric String, such a name when adding a Directory entry
•
IP Address, such as a DNS server IP address
•
Boolean (y/n), such as enabling or disabling DHCP
•
Option, such as selecting a preferred audio device or a ring tone
When any two or more of the numeric string, alphanumeric string, and IP address types can apply to an
entry, the phone will show a soft key for switching input modes among the applicable types. The soft keys
will change when pressed to allow the user to scroll through the available modes, such as SK(num)
SK(alpha) SK(IP). The cursor will also change according to the following table, to remind the user
which input mode is being used:
Input Mode Soft Key
Numeric num
Alphanumeric alpha
IP Address IP
When entering digits during numeric mode, just enter the corresponding digits from the key pad.
When entering letters or symbols during alphanumeric mode, the phone will show a template of 2 or more
choices of symbols as the user presses each digit key; the user can scroll through the choices by
pressing the same key multiple times. To accept a symbol as input, the user can a)stop pressing the digit
key for 1.5s, b)pressing another digit key, c)navigate to another input field (if applicable) by pressing the
UP/DOWN key, or d)save the value by pressing the proper soft key, such SK(save) or SK(ok)
When entering IP address, pressing the * digit will insert a dot (.), or a colon (:) if there are 3 dots entered
already.
When entering numeric, alphanumeric, or IP address values, the following additional soft keys will be
available for easier editing:
•
SK(<<) – Move cursor to the left by 1 character
•
SK(>>) – Move cursor to the right by 1 character
•
SK(erase<) – Erase the character to the left of the cursor
© 2003 - 2005 Linksys, a Division of Cisco Systems
Cursor (appending)
Blinking underscore _
Blinking full-height block █
Blinking half-height block ▅
Cursor (inserting)
Blinking vertical line |
Blinking open rectangle 匚
Blinking half rectangle Ⅼ
Proprietary (See Copyright Notice on Page 2)
DRAFT
27