Chapter2
14.
Review the Camera's settings. To make changes to the
settings, click Back to go back to the previous screen.
If the settings are correct, click Save to continue.
Save the Camera Settings
15.
When the Wizard informs you that the new Camera
settings have been saved, click Contnue.
Disconnect the power from the camera. Click Next.
16.
Disconnect the Power
17.
Disconnect the network cable from the Camera and
from your switch or router. Click Next.
Disconnect the Network Cable
Wreless-G Internet Home Montorng Camera
Setting Up and Mounting the Camera
18.
Reconnect the power to the Camera. Click Next.
Reconnect the Power
The Setup Wizard displays Camera successfully
19.
connected to network. Click Contnue, then click
Next on the following screen.
Camera Successfully Connected to Network
Camera Connected to Wireless Network
20.
The Congratulations screen appears.
Install Camera Utlty
Click this to install the Camera's
•
Utility.
Onlne Regstraton
Click this to register your Camera
•
online.
Ext
Click this to exit the Setup Wizard and install the
•
Camera's utility later.
Go to the "Placement Optons" secton.
8