Setup > Users; Setup > Options - Linksys WVC54GCA User Manual

Chapter4
To upgrade the firmware:
1. Go to the Linksys website, www.lnksys.com, and
download the firmware upgrade file for the Camera.
Then extract the file.
From the Setup > Administration screen, click Upgrade
2.
Frmware.
3. You will see the Upgrade Firmware screen. Click Browse
to find the extracted file, and then double-click it.
4. Click Start Upgrade, and follow the on-screen
instructions. To cancel the upgrade, click Cancel.
Setup > Users
The Setup > Users screen lets you designate access rights
for the Camera's users.
Setup > Users Screen
Users Settings
Use this to assign access rights to the Camera's users.
Allow access by
Select how access is to be granted, either
All users or Only users n database. If you select Only
users n database, edit the user database as needed, as
described below.
Users This lists the user database (the users who have
access to the Camera).
Editing the Database
To add a user to the database:
1. Enter the user's name in the User Name field.
2. Enter the password in the Password and Confirm
Password fields.
Click Add User to save the user in the database.
3.
To edit a user's record in the database:
Select the user from the Users list, then click Edt.
1.
2. Edit the User Name and/or Password as needed.
3. Click Add User to save the updated information.
Wreless-G Internet Home Montorng Camera
Advanced Configuration with the Web-based Utility
Other operations:
Clear
•
clear the User Name, Password, and Confirm Password
fields and start over.
Delete
•
select the user from the list, then click Delete.
Delete All
•
click OK to confirm.
To save your changes, click Apply. To cancel any unsaved
changes, click Cancel. To get additional information about
the screen's features, click Help.
Setup > Options
The Setup > Options screen allows you to set up and
configure DDNS Service, UPnP configuration, and
Alternate Port settings. DDNS (Dynamic Domain Name
System) lets you assign a fixed host and domain name to a
dynamic Internet IP address.
DDNS
Enable DDNS
with the Camera.
Servce Provder
which is preset to TZO.
Doman Name
by your DDNS service provider.
E-Mal Address
the DDNS service.
TZO Key
service provider.
Update Perod
whether the Internet IP address has been changed. Specify
how often to check, from Every 10 mns to Every 2 hrs,
as well as the time to start checking, in hh:mm format.
While editing a user's information, click Clear to
To delete a user's record from the database,
To clear the database, click Delete All, then
Setup > Options Screen
Select this option to enable DDNS service
This is the DDNS service provider,
Enter the domain name assigned to you
Enter the E-mail address used to register
Enter the TZO key provided by your DDNS
Use this to set the schedule for checking
2