Chapter2
Chapter 2:
Settng Up and Mountng
the Camera
Setup Wizard
The Wireless-G Internet Home Monitoring Camera Setup
Wizard will guide you through the installation and
configuration procedure.
1.
Insert the Setup CD-ROM into your CD-ROM drive.
The Setup Wizard should run automatically, and the
Welcome screen should appear. If not, click Start,
then select Run, and then in the field provided, enter
D:\SetupWzard.exe (if "D" is the letter of your CD-
ROM drive).
Setup Wizard - Welcome Screen
Click Next, then click Clck Here to Start to continue.
2.
The Setup Wizard displays the following options.
Setup Camera
Click this to begin the installation
•
process.
Install Camera Utlty
Click this to install the Camera
•
Utility on your PC.
User Gude
Click this to open the PDF file of this User
•
Guide.
Ext
Click this to exit the Setup Wizard.
•
To install the Camera, click Setup Camera.
3.
On the End User License Agreement screen, check the
box next to I accept the agreement and click Next
if you agree and want to continue the installation, or
click Ext to end the installation.
Wreless-G Internet Home Montorng Camera
Setting Up and Mounting the Camera
End User License Agreement
4.
Connect the included network cable to your network
router or switch. Click Next.
Connect Network Cable to the Switch or Router
5.
Connect the other end of the network cable to the
Camera's Ethernet port. Click Next.
Connect Network Cable to the Camera