Setup > Administration - Linksys WVC54GCA User Manual

Chapter4
Estmated Bt Rates for Vdeo Vewng or Recordng
Resoluton Qualty Level
640 x 480 Very High
640 x 480 High
640 x 480 Normal
640 x 480 Low
640 x 480 Very Low
320 x 240 Very High
320 x 240 High
320 x 240 Normal
320 x 240 Low
320 x 240 Very Low
160 x 128 Very High
160 x 128 High
160 x 128 Normal
160 x 128 Low
160 x 128 Very Low
Mobile Settings
Enable Moble Streamng
video streaming to a mobile device.
Video Adjustments
Power Lne Frequency
Select the power line frequency
(0Hz or 0Hz) used in your region, to improve the picture
quality under fluorescent lighting.
Whte Balance
Select the desired option to match the
current environment and lighting.
Brghtness
If necessary, you can adjust the brightness to
obtain a better image. For example, if the camera is facing
a bright light, the image may be too dark. In this case, you
can increase the brightness. You can select a Brightness
value between -3 and 3.
Sharpness
Select the desired option for the sharpness.
You can select a Sharpness value between -3 and 3.
Options
Enable Mcrophone
Select this to enable audio. Using
Audio increases the bandwidth requirements slightly.
Enable Tme Stamp Select this to display a time stamp
on the video.
Enable Text Dsplay
To display text on the video, select
this, then enter up to 20 characters in the field.
To save your changes, click Apply. To cancel any unsaved
changes, click Cancel. To get additional information about
the screen's features, click Help.
Wreless-G Internet Home Montorng Camera
Advanced Configuration with the Web-based Utility
Bt Rate n kbps
4000
3200
1200
480
160
1000
800
300
120
40
800
400
200
100
40
Select this option to enable
Setup > Administration
The Setup > Administration screen allows you to change
the Camera's login name and password, reset the factory
defaults, upgrade the firmware, and set the language.
Setup > Administration Screen
Login
These fields are used to change the login name and
password used to access the Camera. For security purposes,
you should change these from the default values (both set
to admn).
Logn Name
Enter the login name for the Camera.
Password
Enter the password for the Camera.
Verfy Password
Re-enter the password to verify.
Restore Factory Defaults
Restore Defaults To restore the Camera to its factory
default settings, click Restore Defaults.
NOTE:
This will overwrite the Camera's settings
with the factory defaults. Any changes you
made to the Camera's settings will be lost; you
will not be able to recover them.
Firmware Upgrade
Upgrade Frmware
New firmware versions are posted at
www.lnksys.com and can be downloaded for free. If the
Camera is functioning satisfactorily, there is no need to
download a newer firmware version, unless that version
has a new feature that you want to use. Loading new
firmware onto the Camera does not always enhance its
performance.
Linksys recommends that you upgrade the Camera's
firmware within your network; in other words, use a
computer within the Camera's local network. If you
attempt to upgrade the Camera's firmware from a remote
location—using a computer outside of the Camera's local
network—the upgrade will fail.
23