Placement Options - Linksys WVC54GCA User Manual

Chapter2

Placement Options

The Camera can stand on a surface or be mounted on a
wall. Depending on the positioning you want, you attach
the Camera head to its stand at two different points.
Stand Option
Follow these steps to stand the Camera on a surface.
1. Insert the screw end of the stand into the hole on the
bottom panel.
2. Tighten the screw and then the thumbscrew.
3. Place the Camera, and adjust the tilt of its head
accordingly, as described below in section "Camera
Head Tilting".
Camera in Standing Position
Wall Mount Option
You use the Camera's stand to mount the Camera on a
wall. The stand has two wall-mount slots that are spaced
58 mm (2.28 inches) apart.
1. Insert the screw end of the stand into the hole on the
back panel.
2. Tighten the screw end and then the thumbscrew.
3. Determine where you want to mount the Camera.
Attach two screws to the wall, so that the Camera's
wall-mount slots line up with the two screws.
4. Maneuver the Camera so the screws are inserted into
the two slots.
Wreless-G Internet Home Montorng Camera
5.
Thumbscrew
(tightened)
Camera Head Tilting
After the Camera is assembled, you can tilt the Camera
head on its ball joint using the lock nut on the camera
stand. Loosen the lock nut, tilt the camera head as desired,
then tighten the lock nut to secure the position.
Setting Up and Mounting the Camera
Adjust the tilt of its head accordingly, as described
below in section "Camera Head Tilting".
Wall Mount Option
Camera in Wall-Mounting Position (side view)
58 mm
(2.28 inches)
Wall-Mount Slots
Hole for Attaching Stand
(Wall-Mount Option)