Linksys WVC54GCA User Manual page 27

Chapter4
Trigger Motion Detection
Enable Moton Detecton
Motion Detection.
Attachment Type Select the type of attachment to be
sent, either JPEG or Vdeo. If JPEG is selected, a series of
images will be attached to the e-mail as individual files. If
Video is selected, a single video file will be attached.
Frame Rate If the Attachment Type field is set to JPEG,
select the frame rate (number of frames to be captured
per second), from 1 to 5. The default value is 1.
Vdeo Format If the Attachment Type is set to Vdeo,
select the video format, either ASF, MPEG-4, or 3GP.
Pre-Capture Length
This refers to video footage up to
the moment when motion is detected. Select how many
seconds' worth of this video will be saved. This value must
be between 0 and 4 seconds.
Post-Capture Length
Select how many seconds' worth
of video will be saved starting from the moment motion is
detected. This value must be between 1 and 5 seconds.
Interval Enter the time in minutes that must pass
between motion detection events. Valid values are 0-5,
10, or 15. The default is 2. A value of 0 indicates no delay
between events.
Acton(s)
Select the action(s) to be performed upon
motion detection. Select E-Mal to send an e-mail with a
video attachment to a selected recipient., or select FTP to
send the video to a selected FTP server.
E-Mail Alert
If the Action(s) field is set to E-Mail, fill in the following
fields:
Send To
Enter the e-mail address where e-mail will be
sent upon motion detection. You can optionally specify
up to three addresses.
Show "From" as Enter the e-mail address to be used as
the From field in the e-mail to be sent.
Subject
Enter the Subject field for the e-mail, consisting
of 48 alphanumeric characters or less.
SMTP Port Number Enter the SMTP port number from 1
to 65535. The default is 2.
SMTP Mal Server If you want to use an SMTP mail server,
check the box next to Specfy a SMTP Mal Server. Then
enter the mail server's name in the field provided.
My Mal Server Requres Authentcaton
an SMTP mail server that requires authentication (you
must log in with a username and password), check this
box, then fill in the Account Name and Password fields.
Test E-Mal Click this button to send a test e-mail to the
address indicated by the Send To field.
Wreless-G Internet Home Montorng Camera
Advanced Configuration with the Web-based Utility
Check this box to enable
If you are using
FTP
If the Action(s) field is set to FTP, fill in the following fields:
FTP Server Enter the FTP server name.
Port Enter the FTP server's port number.
Logn Name and Password
password for the account on the FTP server.
Passve Mode Select Enable (default) to enable passive
mode, or Dsable to disable it.
Fle Path Name
Enter the path to the location where the
file will be saved on the FTP server.
Set Sensitivity Area
Set Senstvty Area If you want to specify the sensitivity
area settings for motion detection, click this button to
display the Set Sensitivity Area window. The Set Sensitivity
Area window lets you specify the area of the video screen
that is used to detect motion. This is either the full screen,
or up to three user-defined custom areas within the full
screen.
Set Sensitivity Area Window
The following fields appear on the left side of the Set
Sensitivity Area window for each sensitivity area. Specify
the settings as needed, then click Apply.
Full Screen or Wndow 2-
•
sensitivity area, either Full screen by default, or if
Setting Custom Area is selected, Wndow 2, Wndow 3,
or Wndow  (custom areas). To change a custom
area name to a more appropriate name, such as Front
Door, enter the new name in this field.
Settng Custom Area
To specify custom area(s) within
•
the full screen, check this box, then configure up to
three custom sensitivity areas. By default only one
area, Wndow 2, is selected. To create an additional
area, check the box next to its name. You can move
or resize each area as needed. Custom areas may also
overlap.
Threshold
Slide this to the left to reduce the area's
•
sensitivity, or to the right to increase sensitivity.
Enter the login name and
This is the name of the
2