Network Statistics Screen - Cisco 7965G Administration Manual

Chapter 7 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone

Network Statistics Screen

The Network Statistics screen displays information about the phone and network performance.
describes the information that appears in this screen.
To display the Network Statistics screen, follow these steps:
Procedure
Step 1 Press the Settings button.
Step 2 Select Status.
Step 3 Select Network Statistics.
To reset the Rx Frames, Tx Frames, and Rx Broadcasts statistics to 0, press the Clear softkey.
To exit the Network Statistics screen, press the Exit softkey.
Table 7-3
Item
Rx Frames
Tx Frames
Rx Broadcasts
One of the following
values:
Initialized
TCP-timeout
CM-closed-TCP
TCP-Bad-ACK
CM-reset-TCP
CM-aborted-TCP
CM-NAKed
KeepaliveTO
Failback
Phone-Keypad
Phone-Re-IP
Reset-Reset
Reset-Restart
Phone-Reg-Rej
Load Rejected HC
CM-ICMP-Unreach
Phone-Abort
Elapsed Time
Port 1
OL-12650-01
Network Statistics Message Components
Description
Number of packets received by the phone
Number of packets sent by the phone
Number of broadcast packets received by the phone
Cause of the last reset of the phone
Amount of time that has elapsed since the phone last
rebooted
Link state and connection of the PC port (for
example,
PC port is in a link up state and has auto-negotiated
a full-duplex, 100-Mbps connection)
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.0
Auto 100 Mb Full-Duplex
Status Menu
means that the
Table 7-3
7-11