Cisco 7965G Administration Manual page 107

Configuring Features, Templates, Services, and
Users
After you install Cisco Unified IP Phones in your network, configure their network settings, and add
them to Cisco Unified Communications Manager, you must use the Cisco Unified Communications
Manager Administration application to configure telephony features, optionally modify phone
templates, set up services, and assign users.
This chapter provides an overview of these configuration and setup procedures. Cisco Unified
Communications Manager documentation provides detailed instructions for these procedures.
For suggestions about how to provide users with information about features, and what information to
provide, see
For information about setting up phones in non-English environments, see
International Users."
This chapter includes following topics:
Telephony Features Available for the Phone, page 5-2
•
Configuring Corporate and Personal Directories, page 5-16
•
Modifying Phone Button Templates, page 5-17
•
Configuring Softkey Templates, page 5-18
•
Setting Up Services, page 5-18
•
Adding Users to Cisco Unified Communications Manager, page 5-19
•
• Managing the User Options Web Pages, page 5-19
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12650-01
Appendix A, "Providing Information to Users Via a Website."
5
C H A P T E R
Appendix C, "Supporting
5-1