Cisco 7965G Administration Manual page 141

Chapter 7 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone
Table 7-2 Status Messages on the Cisco Unified IP Phone 7965G and 7945G (continued)
Message Description
CTL Installed A certificate trust list (CTL) file is
installed in the phone.
CTL update failed The phone could not update its
certificate trust list (CTL) file.
DHCP timeout DHCP server did not respond.
Dialplan Parsing The phone could not parse the dialplan
Error XML file properly.
(SIP phones only)
Disabled 802.1X Authentication is disabled on
the phone.
OL-12650-01
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.0
Possible Explanation and Action
None. This message is informational
only.
For more information about the CTL
file, refer to Cisco Unified
Communications Manager Security
Guide.
Problem with the CTL file on the
TFTP server.
For more information, refer to Cisco
Unified Communications Manager
Security Guide.
Network is busy—The errors
•
should resolve themselves when
the network load reduces.
No network connectivity between
•
the DHCP server and the
phone—Verify the network
connections.
• DHCP server is down—Check
configuration of DHCP server.
Errors persist—Consider
•
assigning a static IP address. See
the "Network Configuration
Menu" section on page 4-5
details on assigning a static IP
address.
Problem with the TFTP downloaded
dialplan XML file.
For more information refer to the
Cisco Unified Communications
Manager Administration Guide.
You can enable 802.1X authentication
using the Settings > Security
Configuration > 802.1X
Authentication option on the phone.
For more information, see the
Authentication and Status" section on
page 4-36.
Status Menu
for
"802.1X
7-5