Discovery Window - Cisco 7000 Series Configuration Manual

Discovery Window

Discovery Window
The Discovery window provides options for configuring the IP camera to work with Cisco Discovery
Protocol or Bonjour. These applications facilitate monitoring and management of your network.
To display the Discovery window, perform the following steps:
Procedure
From the IP camera user interface, click the Setup link.
Step 1
Click Network Setup to expand the menu.
Step 2
From the Network Setup menu, click Discovery.
Step 3
The Discovery window appears. If you change any options in this window, you must click the Save
Settings button to save the changes. If you do not click this button, changes are not retained when you
exit the window. Save Settings appears at the bottom of the window. You may need to scroll down to it.
Table 5-4
Table 5-4
Option
Cisco Discovery Protocol (CDP) Area
Enable CDP
Show Neighbors button Displays a new window with information about CDP-enabled device
Bonjour Area
Enable Bonjour
IP Filter Window
The IP Filter window provides options for controlling access to the IP camera by designating up to 10
IP addresses or address ranges that are allowed or denied access to the IP camera.
To display the IP Filter window, perform the following steps:
Procedure
From the IP camera user interface, click the Setup link.
Step 1
Step 2 Click Network Setup to expand the menu.
Step 3 From the Network Setup menu, click IP Filtering.
Cisco Video Surveillance 7000 Series IP Camera Configuration Guide, Release 1.1.4
5-6
describes the options in the Discovery window.
Discovery Window Options
Description
Check this check box if CDP is enabled in your network and you want the
IP camera to broadcast CDP discovery messages.
neighbors in your network.
Check this check box if Bonjour is enabled in your network and you want the
IP camera to broadcast Bonjour discovery messages.
Chapter 5 Network Setup
OL-28694-01