Cisco 7000 Series Configuration Manual page 36

Event Notification Window
Table 4-7
Option
User Name
Password
Enable Passive Mode
Secondary FTP Server
Secondary FTP Port
User Name
Password
Enable Passive Mode
Upload Snapshot
Upload Video Clip
Cisco Video Surveillance 7000 Series IP Camera Configuration Guide, Release 1.1.4
4-16
Event Notification Window Options (continued)
Description
Enter the primary FTP server login user name.
Enter the primary FTP server login password.
Check this check box to enable the passive mode feature of the primary FTP
server.
Identify an optional secondary FTP server to which snapshots or video clips
are uploaded by choosing IP Address or Hostname from the drop-down list
and entering the IP address or host name in the corresponding field.
Enter the port number that receives messages on the secondary FTP server.
The default FTP port number is 21.
Enter the secondary FTP server login user name.
Enter the secondary FTP server login password.
Check this check box to enable the passive mode feature of the secondary
FTP server.
Check this check box to upload a snapshot of the activity that triggered the
event.
This functionality is available only when the secondary video stream is
enabled.
Check this check box and enter the following values to upload a video clip
of the activity that triggered the event:
Pre-Capture Length—Enter the amount of video (in seconds) before
•
the event to include in the video clip. The default pre-capture length is
0 seconds (no pre-capture video).
• Post-Capture Length—Enter the amount of video (in seconds) after the
event to include in the video clip. The default post-capture length is 5
seconds.
Chapter 4 Feature Setup
OL-28694-01