Cisco 7000 Series Configuration Manual page 34

Event Notification Window
Table 4-7
Option
URL Base
Port Number
User Name
Password
HTTP Authentication
Email Notification Area
Primary SMTP Server
Primary SMTP Port
POP Server
Authentication
Account Name
Password
Secondary SMTP
Server
Secondary SMTP Port
Cisco Video Surveillance 7000 Series IP Camera Configuration Guide, Release 1.1.4
4-14
Event Notification Window Options (continued)
Description
Enter a string to be used as the prefix in the HTTP URL for the secondary
server. The HTTP URL is sent in this format:
http://<IP address>/<URL Base>?<system-provided-name-value-pairs>
where IP address is the IP address of the destination server, URL Base is the
string that you enter, and system-provided-name-value-pairs is information
about the event.
Enter the port number that receives messages on the secondary server to
which HTTP messages are sent.
If authentication is required on the secondary server to which HTTP
messages are sent, enter the user name.
If authentication is required on the secondary server to which HTTP
messages are sent, enter the password.
If authentication is required on the secondary server to which HTTP
messages are sent, choose the authentication method from the drop-down
list.
Identify the primary SMTP server that is used for sending e-mail by
choosing IP Address or Hostname from the drop-down list and entering the
IP address or host name in the corresponding field.
Enter the port number for the primary SMTP server. The default SMTP port
number is 25.
Identify the primary POP server that is used for sending e-mail by choosing
IP Address or Hostname from the drop-down list and entering the IP
address or host name in the corresponding field.
This field is dimmed if you do not choose Requires POP Before SMTP in
the Authentication field that follows.
If the primary SMTP server requires authentication to send e-mail, choose
the appropriate authentication type from the drop-down list. The
authentication type typically is the same as that for the POP3 server that you
use to receive e-mail.
If the primary SMTP server requires authentication, enter the account name
for the server.
If the primary SMTP server requires authentication, enter the account
password for the server.
Identify an optional secondary SMTP server that is used for sending e-mail
by choosing IP Address or Hostname from the drop-down list and entering
the IP address or host name in the corresponding field.
Enter the port number for the secondary SMTP server. The default SMTP
port number is 25.
Chapter 4 Feature Setup
OL-28694-01