Ip Addressing Window - Cisco 7000 Series Configuration Manual

Time Window
Table 5-2
Option
Secondary DNS
Time Window
The Time window provides options for setting and maintaining the time of the IP camera.
To display the Time window, perform the following steps:
Procedure
Step 1 From the IP camera user interface, click the Setup link.
Step 2 Click Network Setup to expand the menu.
Step 3 From the Network Setup menu, click Time.
The Time window appears. If you change any options in this window, you must click the Save Settings
button to save the changes. If you do not click this button, changes are not retained when you exit the
window. Save Settings appears at the bottom of the window. You may need to scroll down to it.
Table 5-3
Table 5-3
Option
Set Time Mode Area
Manually Configure
Time
Use NTP Server to
Update Time
Local Time Area
Note
Set Local Date
Set Local Time
Cisco Video Surveillance 7000 Series IP Camera Configuration Guide, Release 1.1.4
5-4
IP Addressing Window Options (continued)
Description
Optional. Enter the IP address of a secondary (backup) DNS server to use if
the primary DNS server is unavailable. Enter the DNS server to be used if
the primary DNS server is unavailable.
This address is required if you have a secondary DNS server an you use a
host name instead of an IP address in any configuration field in the IP camera
configuration windows.
describes the options in the Time window.
Time Window Options
Description
Choose this option if you want to set the time for the IP camera manually.
Choose this option if you want the IP camera to obtain its time from a
network time protocol (NTP) server.
If you check this check box, the camera contacts the designated NTP server
every 64 seconds and synchronizes its internal clock with the time of that
server.
These options do not apply if you choose the Use NTP Server to Update Time option.
Enter a date for the IP camera. The camera is updated with this date when
you click Save Settings.
Enter a time for the IP camera. The camera is updated with this time when
you click Save Settings.
Chapter 5 Network Setup
OL-28694-01