Camera Window - Cisco 7000 Series Configuration Manual

Chapter 4 Feature Setup
Table 4-4
Option
Video Adjustments Area
White Balance Mode
RGain
BGain
Exposure Control Area
Exposure level
Exposure mode
Exposure time
Gain control
OL-28694-01
Camera Window Options
Description
Choose one the following White Balance modes from the drop-down list:
Manual—Choose this option if you want to set the white balance by
•
setting RGain (Red Gain) and BGain (Blue Gain) manually.
Auto—White balance is automatically set by camera, which is suitable
•
for most conditions.
The default setting is Auto.
The RGain option is available only when the White Balance mode is set to
Manual. This option adjusts the amount of red coloring in the video image.
Higher values increase the intensity of red coloring; lower values decrease
the intensity.
The default setting is 50%.
The BGain option is available only when the White Balance mode is set to
Manual. This option adjusts the amount of blue coloring in the video image.
Higher values increase the intensity of blue coloring; lower values decrease
the intensity.
The default setting is 50%.
Increase or decrease the exposure level. For example, if you want to add light
(overexpose) to properly expose the image, set the value to +1. If you need
to underexposure the scene, set value to -1.
Default value is 0.0.
Choose one of the following Exposure modes:
• Auto—Automatically sets the exposure level, which is suitable for most
conditions.
• Manual—Choose this option if you want to set Exposure time and Gain
control manually.
Default setting is Auto.
The Exposure time option is available only when the Exposure mode is set
to Manual. This option specifies the range of shutter speed settings to be
used by the IP camera. Shutter speed is measured in fractions of a second.
You can adjust both ends of the shutter speed range.
Default range is 1/5 sec to 1/32000 sec in Manual mode.
The Gain control option is available only when the Exposure mode is set to
Manual. This option specifies the range of gain (amount of amplification
applied to pixel values) settings to be used by the IP camera. You can adjust
both ends of the gain control range.
Default range is to 0 to 100.
Cisco Video Surveillance 7000 Series IP Camera Configuration Guide, Release 1.1.4

Camera Window

4-7