Delete Nas-Bonding - Fujitsu Eternus DX100 S3 User Manual

Chapter 7 NAS Function Setting and Display
7.3 Network Interface Bonding > delete nas-bonding

delete nas-bonding

This command cancels the NAS port bonding settings.
This command is unavailable when firmware version V10L20 is being used.
■ Syntax
delete nas-bonding -master-port
■
Parameter
-master-port
-member-port
port1
[-member-port
This parameter specifies the master port to be canceled.
• A port for which no bonding settings are configured as a master port cannot be specified.
• If bonding is canceled, the NAS interface that was set is configured as the master port.
port1
Master port to be canceled
Example: -master-port 001
Optional. This parameter specifies the member port to be canceled. Multiple member ports can
be specified by inserting a comma (,) between them as a delimiter.
If this parameter is omitted, bonding of the master port that is specified by the "-master-port"
parameter is canceled. If this parameter is specified, only bonding of the specified port is
canceled. However, if canceling bonding of the specified member port eliminates all of the
member ports of the master port, bonding of the master port is canceled.
A port for which no bonding settings are configured as a member port cannot be specified.
port2 port3
, ,...
Member port to be canceled
Example: -member-port 100,101
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
port2 port3
, ,...]
764
P2X0-1210-05ENZ0