Show Flexible-Tier-Pool-Progress - Fujitsu Eternus DX100 S3 User Manual

Chapter 3 Configuration Settings and Display
3.4 Flexible Tier Management > show flexible-tier-pool-progress

show flexible-tier-pool-progress

This command displays the progress rate of formatting Flexible Tier Pools (FTRPs) that are already registered
in the ETERNUS DX. When the FTRP number or the FTRP name is specified, the progress rates for the specified
FTRPs are displayed. Note that the progress rate is not displayed when a specified FTRP is not being
formatted. When the FTRP number or the FTRP name is omitted, a list of the progress rates for the FTRPs being
formatted that are already registered in the ETERNUS DX is displayed.
■ Syntax
show flexible-tier-pool-progress [-ftrp-number
■
Parameter
-ftrp-number
or
-ftrp-name
■ Output
Flexible Tier Pool No
Status
Flexible Tier Sub Pool
Status
Formatting
Optional. This parameter specifies the FTRP identifier to display detailed information for.
Multiple parameters can be selected in a single command.
If omitted, a list of all the FTRPs that are already registered in the ETERNUS DX and that are
being formatted is displayed.
ftrp_number
FTRP number
ftrp_name
FTRP name
FTRP identifier
No FTRP number
Name FTRP name
FTRP status
FTSP identifier
No FTSP number
Name FTSP name
FTSP status
Information on the formatting progress
Progress Progress status (0 – 100%)
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
ftrp_number
| -ftrp-name
202
ftrp_name
]
P2X0-1210-05ENZ0