Show Community-Profile - Fujitsu Eternus DX100 S3 User Manual

Chapter 5 System Settings and Display
5.2 Network Management > show community-profile

show community-profile

This command displays a list of all the registered SNMP community profiles.
■
Syntax
show community-profile [-community
■ Parameter
-community
■ Output
No.
Name
Manager No.
MIB View
Manager list
■ Example(s)
The following example displays a list of all the registered SNMP community profiles:
CLI> show community-profile
No. Name
1 "community1000000000000000000000"
2 "community2"
3 "community3.141592"
4 "c4"
The following example displays the SNMP community profiles that is named community2:
CLI> show community-profile -community community2
No. Name
2 "community2"
<Manager list>
No. IP address
2: 17.20.56.101
6: 144.72.48.100
community_name
Optional. This parameter specifies the SNMP community name of the profiles to be
displayed. Only one community name can be specified at the same time.
community_name
SNMP community name
Community number
Community name
Manager number
MIB view name
Manager details
No. Manager number
IP address Manager IP address
Manager No.
1, 2,
2
1,
2,
Manager No.
2,
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
]
MIB View
3, 4, 5, 6, 7, 8, 9, 10 "view1"
6, "view3"
4, 7, 8, 9 "view4"
3, 4, 5, "viewC4"
MIB View
6, "view3"
531
P2X0-1210-05ENZ0