Size Of Drives And Logical Units; Command Auto-Complete And History Recall - Fujitsu Eternus DX100 S3 User Manual

Chapter 1 Overview

1.3 Size of Drives and Logical Units

1.3 Size of Drives and Logical Units
The size of drives and logical units (such as RAID groups and volumes) are presented in base 2 (binary)
formats.
Kilobyte (KB)
Megabyte (MB)
Gigabyte (GB)
Terabyte (TB)
1.4

Command Auto-complete and History Recall

CLI supports an auto-complete command function and also a command history recall function. When using
the auto-complete command function, if too few letters are entered to uniquely identify a keyword, the CLI
lists keywords that match the entered string and redisplays the string so it can be completed. The auto-
complete function applies to a command name, a parameter name and an operand name. It does NOT apply
when two or more operands are used that are separated with a comma (,). Except for operand names, even if
not all the letters of the keyword are not entered, once enough letters are entered to identify a unique
keyword, it is handled as a complete character string.
The history contains all the commands entered in the active CLI session. A command from the history can be
recalled, edited, and run.
For details about usable keys, refer to
Unit
1024 bytes
1024KB (1,048,576 bytes)
1024MB (1,073,741,824 bytes)
1024GB (109,951,162,776 bytes)
"1.5 Command Editing Hotkeys" (page
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
Size in binary
31
32).
P2X0-1210-05ENZ0