Page 5
Combinations of Functions That Are Available for Simultaneous Executions..........203 Number of Processes That Can Be Executed Simultaneously .................205 Capacity That Can Be Processed Simultaneously ....................205 Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
Page 6
Figure 45 Power Synchronized Unit ..........................86 Figure 46 Wake On LAN................................87 Figure 47 Example of Advanced Copy..........................88 Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
Page 7
Figure 91 An FC Connection for a Remote Copy between ETERNUS DX/AF Storage Systems (When Lines Are Used) ..............................153 Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
Page 9
Guideline for the Number of Drives and User Capacities (When 1.2TB SAS Disks Are Installed) ....................................107 Table 39 Deduplication/Compression Function Specifications................112 Table 40 Method for Enabling the Deduplication/Compression Function............114 Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
Page 10
Combinations of Functions That Can Be Executed Simultaneously (1/2)........203 Table 59 Combinations of Functions That Can Be Executed Simultaneously (2/2) ........204 Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
Page 11
This manual is intended for use of the ETERNUS DX in regions other than Japan. This manual applies to the latest controller firmware version. Thirty-Second Edition July 2023 Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
Page 12
Make sure to read the information. Indicates information and suggestions that supplement the descriptions included in this manual. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
Page 13
- Do not use alcohol or other solvents to clean the ETERNUS storage system. Warning layout ribbon Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
Power control functions that are used to link power-on "Remote Power Operation (Wake On LAN)" (page 87) and power-off operations with servers and perform scheduled operations. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
When Nearline SAS disks that have 6TB or more are used, the available RAID levels are RAID0, RAID1, RAID6, and RAID6-FR. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
The data is stored on two duplicated drives at the same time. If one drive fails, other drive continues operation. Figure 2 RAID1 Concept Data writing request Drive#0 Drive#1 Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
Parity for data I to L: P I, J, K, L Parity for data M to P: P M, N, O, P Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
I, J, K, L Parity for data M to P: P1 and P2 M, N, O, P M, N, O, P Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
*1: "N" is the number of RAID6 configuration sets. For example, if a RAID6 group is configured with "(3D+2P)´2+1HS", N is "2". Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
*2: For details on the RAID levels that can be configured with Nearline SAS disks that have 6TB or more, refer to "Supported RAID" (page 16). Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
*3: This value is for a 15.36TB SSD RAID1+0 (4D+4M) configuration in the ETERNUS DX100 S3/ DX200 S3. *4: This value is for a 30.72TB SSD RAID1+0 (4D+4M) configuration in the ETERNUS DX100 S4/ DX200 S4. *5: For details on the number of configuration drives for each RAID level and recommended con-...
A volume may be up to 128TB. However, the maximum capacity of volume varies depending on the OS of the server. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
The data is seen by the server as being non- deduplicated and uncompressed. The volume type is TPV. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
Page 28
VVOL is created. The maximum number of volumes that can be created in the ETERNUS DX decreases by the number of volumes for the VVOL management information that are created. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
Total number of drives Model Up to 120 Up to 240 Up to 264 ETERNUS DX100 S4/DX100 S3 — Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
*1: When there are multiple hot spares with a larger capacity than the failed drive, the hot spare with the smallest capacity among them is used first. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
By linking the Data Integrity Extensions (DIX) function of Oracle DB, data integrity can be ensured in the entire system including the server. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
Redundant Copy function if the spare sector is insufficient and the problem cannot be solved by assigning an alternate track. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
However, it should be noted that when the priority is high and a rebuild operation is performed for a RAID group, the performance (throughput) of this RAID group may be reduced. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
For a normal rebuild process that is performed when the reserved space is already being used and the second drive fails, a copyback is performed according to the settings of the Copyback- less function. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
(or hot spare) and the failed drive are the same. Drive type (SAS disks, Nearline SAS disks, SSDs, and Self Encrypting Drives [SEDs]) • Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
RAID group configuration. This should be taken into consideration when enabling or disabling the Copybackless function. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
RAID group configuration drive and copyback starts. The copybackless set- ting can be enabled or disabled until the drive is replaced. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
Page 39
The maintenance operation privilege is required to perform this setting. After the settings are changed, the ETERNUS DX does not need to be turned off and on again. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
Data in physically allocated areas are checked in blocks and unnecessary areas (areas where 0 is allocated to all of the data in each block) are released to unallocated areas. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
*2: The maximum pool capacity is the capacity that combines the FTSP capacity and the Thin Provisioning Pool capacity in the ETERNUS DX. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
The capacity of a TPV can be expanded after it is created. For details on the number of TPVs that can be created, refer to "Volume" (page 26). Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
TPV from an OS or an appli- cation that does not support Advanced Format. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
TPP is expanded, the physical capacity is unevenly allocated among the newly added RAID group and the existing RAID groups. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
Page 46
While TPV balancing is being performed, the balancing level may become lower than before • balancing was performed if the capacity of the TPP to which the TPVs belong is expanded. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
That Are Available for Simultaneous Executions" (page 203). For details on the procedure of TPV/FTV capacity optimization, refer to "ETERNUS Web GUI Us- er's Guide". Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
The QoS for each volume can be controlled by using the ETERNUS SF Storage Cruiser's QoS management option. For details on the QoS automation function, refer to the ETERNUS SF Storage Cruiser manual. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
Access frequency High High speed SSD High speed SAS disk Large capacity and cheap Nearline SAS Work volume disk Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
Add RAID groups with the same specifications (RAID level, drive type, and number of member drives) as those of the existing RAID groups. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
In general, selecting "Thin" is recommended. The Allocation method can be changed after an FTV is created. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
The FTRP capacity that can be used for VVOLs differs from the maximum Thin Provisioning • Pool capacity. For details, refer to "VMware VVOL" (page 136). Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
A RAID group (RAID0) that is dedicated to the Extreme Cache Pool is configured with the speci- fied SSDs, and volumes for the Extreme Cache Pool are crated in the RAID group. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
When volume capacity is insufficient, a volume can be moved to a RAID group that has enough free space. This function is recommended for use when the desired free space is available in the destination. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
Page 56
Distributing a single volume to multiple RAID groups makes I/O access from the server more effi- cient and improves the performance. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
A volume is changed to the appropriate type for the migration destination RAID groups or pools (TPP and FTRP). Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
During RAID Migration, the access performance for the RAID groups that are specified as the RAID Migration source and RAID Migration destination may be reduced. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
• • RAID groups in which WSVs are registered • RAID groups that are configured with RAID5+0 or RAID6-FR Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
Page 60
When using the controller firmware for the China region, this applies to controller firm- ware versions earlier than V10L88-9006 or earlier than V10L89-9006. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
A concatenated volume can be used as an OPC, EC, or QuickOPC copy source or copy destination. It can also be used as a SnapOPC/SnapOPC+ copy source. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
OS or an applica- tion that does not support Advanced Format. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
WSV, the write performance may be reduced when accessing the created WSVs from an OS or an application that does not support Advanced Format. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
SEDs that are installed. Once the key is registered, the key cannot be changed or deleted. The common key is used to authenticate RAID groups when key management server linkage is not used. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
For Standard volumes, SDVs, SDPVs, and WSVs, encryption is performed for each volume. For TPVs and FTVs, encryption is performed for each pool. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
The key is automatically changed after the specified period of time. Key operation costs can be reduced by changing the key automatically. Also, changing the key by force can be performed manually. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
RAID group RAID group Exclusive authentication Key group key for a group RAID group Common key Global hot spare Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
Page 69
Rebuilding and performing copy back (when using Global Hot Spares) Performing a redundant copy (when using Global Hot Spares) Turning on the disk motor with the Eco-mode Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
The menu that is displayed after logging on varies depending on the role that is added to a user account. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
The function categories for the roles cannot be changed. • A role must be assigned when creating a user account. • Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
When the primary RA- DIUS server failed to authenticate, the secondary RADIUS server attempts to authenticate. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
Page 73
When using RADIUS authentication, if the role that is received from the server is unknown (not set) for the device, RADIUS authentication fails. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
Log out the process details, and the process results Audit log System administrator Syslog server ETERNUS DX Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
RAID groups that are registered as an REC Disk Buffer • TPPs where the Deduplication/Compression function is enabled FTSP • FTRP • Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
*1 : The monitoring time period to check if there is no access to a disk for a given length of time and stop the drive. *2: Self Encrypting Drives (SEDs) are also included. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
Page 77
The motor starts rotating The disk stops 10 min after the scheduled operation 10 min before the scheduled operation Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
ETERNUS DX storage systems ETERNUS SF Storage Cruiser Collects power consumption and temperature data for each storage system. Server Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
Password authentication and client public key authentication are supported as authentication methods for SSH. For details on supported client public key types, refer to "User Authentication" (page 72). Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
This function reports various failures, that occur in the ETERNUS DX, to the remote support cen- ter. The maintenance engineer is notified of a failure immediately. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
Page 84
Using the ETERNUS Multipath Driver to monitor the storage system by host senses is recom- mended. Sense codes that cannot be detected in a single configuration can also be reported. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
Figure 44 Device Time Synchronization NTP server Date and Time yyyy xx:xx:xx Time Zone GMT + 09.00 Daylight Saving Time ETERNUS DX Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
Supply (UPS) unit that is connected to the server and automatically turns on and off the ETERNUS Figure 45 Power Synchronized Unit Server Server for server for server Power synchronized unit ETERNUS DX Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
ETERNUS Web GUI or ETERNUS CLI can be used to turn off the power of an ETERNUS DX remote- Figure 46 Wake On LAN Administration terminal Wake On LAN utility Packet transmission ETERNUS DX Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
ETERNUS SF Express ETERNUS SF Express allows easy management and backup of sys- tems with a single product. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
Performing system test data replication • Restoring backup data (restoration after replacing a drive when the copy source drive has failed) Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
EC is suitable for the following usages: • Performing a backup • Performing system test data replication Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
Consistency mode, this mode is used to change the transfer mode to transfer data that has not been transferred or to resume transfers. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
Page 93
When the ETERNUS DX90, the ETERNUS DX400 series, or the ETERNUS DX8000 series is used • as the copy destination, REC cannot be performed between encrypted volumes and unencryp- ted volumes. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
"Copy session 2" refers to a copy session in which the copy source area is also used as the copy destination area of another copy session. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
1 is backed up. Data is not backed up in the copy source of copy session 1. *2: The supported modified data size varies depending on the controller firmware version. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
*4: When copy session 1 uses the REC Consistency mode, the data transmission sequence of copy session 1 is guaranteed, but the data transmission sequence of copy session 2 is not guaran- teed. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
*2: When copy session 1 uses the REC Consistency mode, the data transmission sequence of copy session 1 is guaranteed, but the data transmission sequence of copy session 2 is not guaran- teed. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
• "Stripe Depth 256KB" cannot be specified for a "RAID5 (8D+1P)" configuration that is used for TPPs and FTSPs. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
After the disconnected controller is installed again and returns to normal status, this controller becomes the assigned CM again. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
Drive#6 Drive#7 Drive#8 Drive#9 Drive#10 Drive#11 *1: The capacity of the user data area is equivalent to four drives. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
Overviews of the Deduplication/Compression function, the Deduplication function, and the Com- pression function are described below. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
Data 1 is Data 2 is written written Analysis Deduplication Duplicate data blocks are removed Target volume for deduplication ETERNUS DX Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
Deduplication/Compression Volume may fail due to a capacity shortage of the DEDUP_SYS Volume. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
Page 113
Volume and DEDUP_MAP Volumes) are created for each TPP that has the Deduplication/ Compression enabled. For details, refer to "● Deduplication/Compression System Volumes" (page 115). Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
TPP. However, these two types of TPVs should be located in separate TPPs. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
● Deduplication/Compression System Volumes The following internal volumes are created for each TPP where the Deduplication/Compression function is enabled. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
Page 116
Zero out the unused areas and then execute "TPV/FTV capacity optimization" for both the DED- UP_SYS Volume and the DEDUP_MAP Volumes. For details, refer to "TPV/FTV Capacity Optimization" (page 47). Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
(a virtual volume that can be seen (TPV) (TPV) from the server) Non-Deduplication/ Compression Actual written data after Volume deduplication/compression Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
Page 119
*4: Encryption can be performed by creating a volume in the encrypted pool, or migrating a vol- ume to an encrypted pool. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
When servers are duplicated and connected using a cluster configuration to share a single ETERNUS DX among multiple servers, cluster control software is required. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
B, which has a priority, significantly increases, the required high priority, can be reduced performance for B cannot be maintained Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
The number of LUNs that can be referenced from the host varies depending on "LUN Address- • ing" and "LUN Expand Mode (Peripheral Device Addressing)" of the host response settings. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
For Storage Cluster settings, create TFO groups that include target volumes (TFOV), and specify the connection configuration and the policy for each group. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
The following table provides the function specifications for the Storage Cluster. Table 44 Storage Cluster Function Specifications Item Specifications Number of connectable storage systems Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
Page 127
Primary storage and the Secondary storage simultaneously, and achieves consistency between the two storage systems. This is achieved by operating Advanced Copy from a TFOV to a TFOV. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
Page 128
An ETERNUS DX S4/S3 series refers to an ETERNUS AF S2 series, an ETERNUS AF series, an ETERNUS DX S4 series, an ETERNUS DX S3 series, or an ETERNUS DX8000 S3 series. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
ETERNUS DX and can shorten the time of the migration. This method is suitable for cases requiring quick data migration. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
VVOL VVOLs are logical volumes that are created in FTRPs. Multiple VVOLs can be created in a storage container. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
Volume name (fixed) $VVOL_META Volume type Usage System Usage details VVOL management information Capacity 1,040MB Volume number (of each ETERNUS DX) Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
Page 139
• To use VMware vSphere Replication, the controller firmware version of the ETERNUS DX must be V10L80 or later. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
- Backup and restore of virtual machines - Data transfer ETERNUS DX Veeam Storage Integration software ETERNUS DX software (setup tool) Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
Page 141
ETERNUS DX. In such configuration, an error might occur at the jobs that are in conflict with each other when being executed from multiple Veeam Backup & Replication. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
If the copy source volume is a TPV/FTV, the same TPP/FTRP as the copy source Copy destination TPVs/FTVs can also be created in any TPP/FTRP using ETERNUS CLI. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
Creating volumes in the ETERNUS DX and assigning created volumes to VM instances can be performed via an OpenStack standard interface (Horizon). Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
The IPsec function is not supported. Connect the server using a LAN switch that has the IPsec function as required. Internet Protocol • IPv4 and IPv6 are supported. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
Page 148
One of the following transfer rates can be specified: • For SAS 12Gbit/s 12Gbit/s 6Gbit/s 3Gbit/s For SAS 6Gbit/s • 6Gbit/s 3Gbit/s 1.5Gbit/s Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
Figure 84 Single Path Connection (When a SAN Connection Is Used — Switch Connection) Server Server Server Switch Port Port Port Port CM#0 CM#1 ETERNUS DX Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
Figure 86 Multipath Connection (When a SAN Connection Is Used — Switch Connection) Server Server Server Switch Switch Port Port Port Port CM#0 CM#1 ETERNUS DX Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
The connection interface is FC or iSCSI. In addition, only the switch connection topology is suppor- ted. Direct connections are not supported. For more details on Storage Cluster, refer to "Storage Cluster" (page 125). Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
ETERNUS DX/AF ETERNUS DX/AF WAN (IP line) Copy source Copy destination FC-RA FC-RA Digital service unit Digital service unit Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
The IPsec function is not supported for iSCSI interfaces. Select a LAN switch with the IPsec function to use the IPsec function to perform a remote copy. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
*2: This cannot be connected to a remote interface (iSCSI-RA) of the ETERNUS DX S2 series. Use a host interface. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
"LAN for Remote Support (RMT Port)" (page 158) and use the RMT ports to connect to the remote support center via a different network. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
The IP addresses of the Master CM and the Slave CM are set. CM#0 CM#1 Controller enclosure ETERNUS DX Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
Sending ETERNUS DX logs to the AIS Connect server • Remote access from the AIS Connect server to the ETERNUS DX • Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
The sections that are shown below explain how to set the ETERNUS DX for remote support. For details on the settings, refer to "Configuration Guide (Web GUI)". Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
CM#0 CM#1 Remote support center Controller enclosure ETERNUS DX Different LANs are used for MNT ports and RMT ports. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
LAN is called the Master CM and the other CM is called the Slave CM. When an error occurs in the Master CM or LAN, the Master CM is switched automatically. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
The IP address of the Slave CM ETERNUS DX is used to switch the Master CM and display the status of the ETERNUS DX. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
Configurations where the controller enclosure is powered by the UPS while the drive enclosures are powered directly from AC are not supported. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
RS232C cable An instruction is issued to turn on/off the ETERNUS DX when AC output/ no AC output is detected. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
Page 167
Shutdown of all the server UPS units Issuance of command to turn off the ETERNUS DX from the power synchronized unit ETERNUS DX shutdown Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
ETERNUS DX startup *1: The server must be set to suspend server OS startup until the ETERNUS DX startup is complete. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
Powering on sequence A power on instruction is issued to the ETERNUS DX via the LAN. ETERNUS DX startup Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
Board that is located between the front of the enclosure and the rear of the enclosure (the controller (CM) or I/O module (IOM) side) Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
Board that is located between the front of the enclosure and the rear of the enclosure (the controller (CM) or I/O module (IOM) side) PSU: Power Supply Unit Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
Page 173
Board that is located between the front of the enclosure and the rear of the enclosure (the controller (CM) or I/O module (IOM) side) PSU: Power Supply Unit Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
Cache Memory BUD: Bootup and Utility Device • Backup area in case of power outage Storage area for firmware • Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
Page 175
Board that is located between the front of the enclosure and the rear of the enclosure (the controller (CM) or I/O module (IOM) side) PSU: Power Supply Unit Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
DE #01 DI (IN) DI (OUT) DI (OUT) DI (OUT): Drive interface (OUT) port DI (IN): Drive interface (IN) port Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
The following types of controller are available; a controller that has no host interfaces and a con- troller that has host interfaces. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
Memory Extension (ETFMCB-L / ETDMCBU-L) can be installed to expand the NAS function if a Uni- fied kit (ETFLN2U / ETFLN2U-L / ETDLN2U / ETDLN2U-L) is already installed. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
Fibre Channel (FC) enables high speed data transfer over long distances by using optical fibers and coaxial cables. FC is used for database servers where enhanced scalability and high performance are required. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
Unified models and the ETERNUS DX200 S4 controller module for standard models. The Memory Extension must be ordered if the ETERNUS DX100 S4 controller module for SAN con- nections, the ETERNUS DX200 S4 controller module for economy models, or the ETERNUS DX100 S3/DX200 S3 is used.
Drive enclosures can be installed until the total number of drive slots reaches the maximum num- ber that can be installed (144 for the ETERNUS DX100 S4/DX100 S3 and 264 for the ETERNUS DX200 S4/DX200 S3). If the number of drive slots reaches the limit, additional drive enclosures can- not be added.
SAS disks can store information that requires a low access rate at a reasonable speed more cost effectively than SAS disks. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
Page 183
RAID1 configuration that has a high I/O access load. Using a RAID1+0, RAID5, RAID5+0, or RAID6 configuration is recommended. The following types of SSDs are supported in the ETERNUS DX. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
*1: Bits are used to compare the prices for each drive type and the price goes up in the following order; ◎, ¡, and △. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
■ Number of Installable Drives The maximum number of installable drives is 144 for the ETERNUS DX100 S4/DX100 S3 and 264 for the ETERNUS DX200 S4/DX200 S3. The following table shows the number of installable drives when the maximum number of drive en- closures are installed.
Slot#23 in ascending order. Then, install drives in the slots of a drive enclosure from Slot#0 to Slot#23 in ascending order. Figure 117 Installation Diagram for 2.5" Drives Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
Page 196
*6: Hot expansion can only be performed when it is expanded together with a CM in a single-con- troller configuration. *7 : FEMs are installed in high-density drive enclosures. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
When a multipath configuration is used, switch to the host paths of the CM that will not have maintenance performed to continue operation. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
• If the sanitization function is not supported by the drive, this function will terminate with an er- ror. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
*7 : If an FTRP is deleted, the FTSP, which is included in the FTRP, is also deleted. The FTRP needs to be deleted to delete the FTSP. *8: This operation is possible in units of parent pools (FTRPs). Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
¡ ¡ ¡ ¡ ¡ Pool ´ Create a LUN ¡ ¡ ¡ ¡ ¡ ¡ ¡ while rebuilding Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
Page 202
*14: This is part of the cache parameter settings, and cannot be configured in the units of vol- umes. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited P3AM-7642-32ENZ0...
*11 : The REC session needs to be suspended or stopped before the operation. *12: The motor-off state of Eco-mode is stopped, and the drive motor is activated (spin-up). Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
A total capacity of 128TB can be processed simultaneously for TPV balancing, FTRP balancing, RAID Migration, Flexible Tier Migration, and Non-disruptive Storage Migration. Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2023 Fujitsu Limited...
Page 206
However, Fujitsu shall assume no responsibility for any operational problems as the result of errors, omis- sions, or the use of information in this manual. Fujitsu assumes no liability for damages to third party copyrights or other rights arising from the use of any •...