Fujitsu DX100 S3 Setup Manual
Hybrid storage systems
Hide thumbs
Also See for DX100 S3:
- User manual (946 pages) ,
- Setup manual (129 pages) ,
- Operation manual (114 pages)
Table of Contents
Advertisement
Quick Links
FUJITSU Storage
ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems
Preparation
STEP
An installation space and network environment must be prepared in advance.
Prepare the following manuals:
●
Manuals for the ETERNUS DX100 S3/DX200 S3
●
Related manuals, such as manuals for the server or the networking equipment that is used
Installation Space
Site Planning Guide
Installation space
Check that the installation area meets the space requirements of the rack in which the ETERNUS DX is to be
installed.
Environmental considerations for installation
Check if the installation area for the ETERNUS DX meets the environmental conditions and installation environment
conditions.
Power outlets
Check the type and the number of power outlets/sockets that are required to install the ETERNUS DX.
Network Environment
Configuration Guide (Basic)
•
Configuration Guide (Web GUI)
•
Completing and attaching the Network Settings label
Write down the IP address for the ETERNUS DX on the Network Settings label and attach it inside the rack.
Settings for the PC
●
Set up the network environment
-
IP address : 192.168.1.2
-
Subnet mask : 255.255.255.0
●
Set the Web browser
Refer to "Configuration Guide (Web GUI)" for details on the settings that are required.
Setup Guide
Setup Guide
P3AM-7852-06ENZ0
Advertisement
Table of Contents
Related Manuals for Fujitsu DX100 S3
Summary of Contents for Fujitsu DX100 S3
- Page 1 P3AM-7852-06ENZ0 FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Setup Guide Setup Guide Preparation STEP An installation space and network environment must be prepared in advance. Prepare the following manuals: ● Manuals for the ETERNUS DX100 S3/DX200 S3 ●...
-
Page 2: Installation In A Rack
M5 screws Rack rail (for left side) Washers Plate M5 screws M5 screws Washers Plate M5 screws (Front rack pillars) Rack rail (for right side) FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Setup Guide P3AM-7852-06ENZ0 Copyright 2017 FUJITSU LIMITED... - Page 3 Flange cover Make sure to install or remove the controller enclosure or the drive enclosure in the rack with two or more IMPORTANT people. FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Setup Guide P3AM-7852-06ENZ0 Copyright 2017 FUJITSU LIMITED...
- Page 4 Flap bracket B M5 screw M4 screw Rack rail Rack rail (left) (right) Flap bracket A Stopper bracket (right) (Rack pillar: front) (Rack pillar: rear) FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Setup Guide P3AM-7852-06ENZ0 Copyright 2017 FUJITSU LIMITED...
-
Page 5: Cable Connection
Failure to discharge static electricity before touching the connectors may cause a device failure. FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Setup Guide P3AM-7852-06ENZ0 Copyright 2017 FUJITSU LIMITED... -
Page 6: Lan Cable
1Gbit/s, Ethernet 1Gbit/s Port#0 Port#1 Port#0 Port#1 iSCSI 10Gbit/s (10GBASE-T), iSCSI 1Gbit/s ● Port#0 Port#1 Port#0 Port#1 Ethernet 1Gbit/s Port#0 Port#1 Port#2 Port#3 FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Setup Guide P3AM-7852-06ENZ0 Copyright 2017 FUJITSU LIMITED... - Page 7 Between Controller 1 and I/O module line 1, connect the drive enclosures in descending order of the drive enclosure numbers. Drive enclosure 2 Drive enclosure 1 Controller enclosure FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Setup Guide P3AM-7852-06ENZ0 Copyright 2017 FUJITSU LIMITED...
-
Page 8: Power Cords
RMT port of Controller 0 (CM #0) Controller enclosure Powering On Turn on the PC terminal and the ETERNUS DX. Power switch Drive enclosure Controller enclosure FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Setup Guide P3AM-7852-06ENZ0 Copyright 2017 FUJITSU LIMITED... -
Page 9: Initial Setup
If the network environment for the MNT port is not set up, some functions will be unusable. After the settings are complete, close the Web browser. FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Setup Guide P3AM-7852-06ENZ0 Copyright 2017 FUJITSU LIMITED... -
Page 10: Firewall Settings
If the network environment for the MNT IMPORTANT port is not set up, some functions will be unusable. Make sure to set up the network environment. FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Setup Guide P3AM-7852-06ENZ0 Copyright 2017 FUJITSU LIMITED... -
Page 11: Raid Configuration Settings
Select which RAID group to use the selected drive as a Dedicated Hot Spare for and click the [Assign] button. In the confirmation screen that appears, click the [OK] button. FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Setup Guide P3AM-7852-06ENZ0 Copyright 2017 FUJITSU LIMITED... -
Page 12: Host Affinity Settings
To display the screen to add a LUN group: Click the [Connectivity] tab, click [LUN Group] in [Category], and then click [Add LUN Group] in [Action]. FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Setup Guide P3AM-7852-06ENZ0 Copyright 2017 FUJITSU LIMITED... -
Page 13: Monitoring Setup
All necessary settings are complete, and the ETERNUS DX is now ready for normal operation. Configuration Guide (Basic) • Configuration Guide -Server Connection- • FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Setup Guide P3AM-7852-06ENZ0 Copyright 2017 FUJITSU LIMITED... -
Page 14: Operation And Maintenance
• The content of this manual may not be reproduced or distributed in part or in its entirety without prior permission from Fujitsu. FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Setup Guide P3AM-7852-06ENZ0 Copyright 2017 FUJITSU LIMITED...