Draytek VigorAP 700 User Manual page 39

MAIN SSID
Multiple SSID
Channel
Associated Clients
Associated Repeater
AP
Root AP SSID
Site Survey
After you finish with setting, please click APPLY, and the following screen will be displayed:
Please input the SSID (the name used to identify this VigorAP 700)
here. You can input up to 32 alphanumerical characters. PLEASE
NOTE THAT SSID IS CASE SENSITIVE.
The access point supports multiple SSID function; up to four SSIDs
can be set. If you want to configure additional SSIDs, please click
this button. For detailed descriptions of the function, please refer to
Section 2-4-1-1.
Please select a channel number you wish to use. The channel
number must be same with another VigorAP 700 you wish to
connect
Click Show Active Clients button and a new popup window will
appear which contains the information about all wireless clients
connected to this access point. You can click Refresh button in
popup window to keep information up-to-date.
Click Show Repeater AP button and a new popup window will
appear which contains the information about all AP with repeater
mode connected to this access point. You can click Refresh button
in popup window to keep information up-to-date.
In Universal Repeater mode, this device can act as a station to
connect to a Root AP. You should assign the SSID of the Root AP
here or click Select Site Survey button to choose a Root AP.
Click Wireless Site Survey button, then a Wireless Site Survey
Table will pop up. It will list all available access points near by. You
can select one access point in the table and the access point will join
wireless LAN through this access point. Please go to Section
2-4-2-1 for more information about the Wireless Site Survey Table.
31
VigorAP 700 User's Guide