Table of Contents
Advertisement
Chapter 4: Fast Setup for Head-to-
Head Play
Note: These directions are provided for gamers
playing Head-to-Head with no setting changes.
If you wish to change the Game Adapter's set-
tings to match those of your wireless network,
you should follow the directions provided in
"Chapter 5: Setting up the Wireless-G Game
Adapter for Network Play".
1. Plug the included Ethernet network cable into the Game
Adapter's LAN port, as shown in Figure 4-1.
2. Plug the other end of the Ethernet network cable into the
RJ-45 port of your game console.
3. Plug the supplied power cable into the Game Adapter's
Power port, as shown in Figure 4-2. Then, plug the other
end into an electrical outlet, preferably a surge protector.
4. Set your game console for multiplayer gaming as usual.
6
Instant Wireless
Series
®
Figure 4-1
Figure 4-2
Wireless-G Ethernet Bridge
Chapter 5: Setting Up the
Wireless-G Game Adapter for
Network Play
Connecting the Game Adapter to Your PC
1. Plug the included Ethernet network cable into the Game
Adapter's LAN port, as shown in Figure 5-1.
2. Plug the other end of the Ethernet network cable into
your PC's RJ-45 port.
3. Plug the supplied power cable into the Game Adapter's
Power port, as shown in Figure 4-2. Then, plug the other
end into an electrical outlet, preferably a surge protector.
4. Start your PC.
Figure 5-1
Figure 5-2
7
Advertisement
Table of Contents
