Advertisement
Switch action
To
start the tool, simply pull the trigger.
Tool
speed is increased by increasing pressure on
the trigger. Release the trigger to stop. For
continuous operation, pull the trigger and then
push in the lock button. To stop the tool while
in the locked position, pull the trigger fully,
then release it.
CAUTION:
Before plugging in the tool, always check to see that the switch trigger actuates properly and
returns to the "OFF" wsition when released.
Reversing switch
This tool has a reversing switch to change the
direction of rotation. Move the reversing
switch lever to
t>
the position for clockwise
rotation or the
0
position for counterclock-
wise rotation.
Reversing
switch
lever
-
CAUTION:
*Always check the direction of rotation before operation.
*Use the reversing switch only after the tool comes to
a
complete stop. Changing the
direction
of
rotation before the tool stops may damage the tool.
7
Advertisement
