Page 1
INSTRUCTION MANUAL Hammer Drill HP1630 HP1631 008892 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ENGLISH SPECIFICATIONS Model HP1630 HP1631 Concrete 16 mm 16 mm Capacities Steel 13 mm 13 mm Wood 30 mm 30 mm No load speed (min 0 - 3,000 0 - 3,000 Blows per minute 0 - 45,000 0 - 45,000 Overall length 296 mm 295 mm...
a cord suitable for outdoor use reduces the risk of preventive safety measures reduce the risk of electric shock. starting the power tool accidentally. If operating a power tool in a damp location is 20. Store idle power tools out of the reach of unavoidable, use a ground fault circuit children and do not allow persons unfamiliar with the power tool or these instructions to...
only when hand-held. Reversing switch action Do not touch the bit or the workpiece 1. Reversing immediately after operation; they may be switch lever extremely hot and could burn your skin. Some material contains chemicals which may be toxic. Take caution to prevent dust inhalation and skin contact.
ASSEMBLY For Model HP1631 1. Sleeve 2. Ring CAUTION: Always be sure that the tool is switched off and • unplugged before carrying out any work on the tool. Installing side grip (auxiliary handle) 1. Side grip 008900 Hold the ring and turn the sleeve counterclockwise to open the chuck jaws.
If you need any assistance for more details regarding symbol to use "rotation only" action. these accessories, ask your local Makita Service Center. Drilling in wood Tungsten-carbide tipped hammer bit •...