Related Manuals for Makita HP1510
Summary of Contents for Makita HP1510
- Page 1 Hammer Drill MODEL HP1500 MODEL HP1501 MODEL HP1510 002395 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
-
Page 2: Specifications
Director have reached the end of their life MAKITA INTERNATIONAL EUROPE LTD. must be collected separately and Michigan Drive, Tongwell, Milton Keynes, Bucks MK15 returned to an environmentally com- 8JD, ENGLAND patible recycling facility. -
Page 3: Safety Instructions
SAFETY INSTRUCTIONS ENA001-2 WARNING: When using electric tools, basic safety precautions, including the following, should always be followed to reduce the risk of fire, electric shock and personal injury. Read all these instructions before operating this product and save these instructions. For safe operations: tion and changing accessories. - Page 4 ADDITIONAL SAFETY RULES FOR TOOL ENB002-1 Hold tools by insulated gripping surfaces Hold the tool firmly with both hands. when performing an operation where the Always use the side grip. cutting tool may contact hidden wiring or Keep hands away from rotating parts. its own cord.
-
Page 5: Functional Description
To stop the tool from the locked position, pull the switch trigger fully, then 2. Lock button release it. For Model HP1510 To start the tool, simply pull the switch trigger. Release the switch trigger to stop. For continuous operation, pull the switch trigger and then push in the lock but- ton. - Page 6 To remove the bit, hold the ring and turn the sleeve counterclockwise. 1. Ring 2. Sleeve For Model HP1500,HP1510 002454 To install the bit, place it in the chuck as far as it will go. Tighten the chuck by hand. Place the chuck key in each of the three holes and tighten clockwise. Be sure to tighten all three chuck holes evenly.
- Page 7 Depth gauge 002438 The depth gauge is convenient for drilling holes of uniform depth. Loosen the side grip and insert the depth gauge into the hole in the side grip. Adjust the depth gauge to the desired depth and tighten the side grip. NOTE: •...
-
Page 8: Maintenance
CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. - Page 9 Memo...
- Page 10 Memo...
- Page 11 Memo...
- Page 12 Makita Corporation Anjo, Aichi, Japan 884009D224...