Figure 4-26 Secondary Stream Video Codec Settings; Table 4-4 Video Streaming Resolutions - 1080P Resolution Primary Stream - Honeywell HCD5HIH Reference Manual

Document 800-07067V5 Rev A
07/2013
®
HCD5 equIP Series True Day/Night Network Box Camera Reference Guide
Figure 4-26 Secondary Stream Video Codec Settings
Note Enabling the secondary (MJPEG) stream disables the local video out (aim
and focus). (HCD5HIH(X) only)
Configuring the Compression Settings
1. On the Compression Settings tab, in the Statistics area, select the Received check
box to receive in real time the bit rate and frame rates for the current image.
Deselecting the check box disables the refresh rate.
Note The Received check box is disabled by default. When you log out, this check
box reverts to the disabled state.
2. Use Table 4-4 to set up the streaming resolution and
compression settings.
Table 4-4 Video Streaming Resolutions - 1080p Resolution Primary Stream
Primary Stream Resolutions
1920 x 1080
Default settings shown for NTSC models
Enable/Disable the secondary stream
Set the Resolution
Set the Frame Rate
Set the Priority to Quality or Bit Rate
Set the Compression Ratio
Set the Target Bit Rate
Set the Maximum Bit Rate (kbps)
Table 4-8
Secondary Stream Resolutions
H.264
1920 x 1080
1280 x 720 (not supported)
800 x 450
640 x 360
320 x 180
for the other
MJPEG
640 x 360
320 x 180
63