Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Reference Manual
Advertisement
Table of Contents
Related Manuals for Honeywell HCD5HIH
Summary of Contents for Honeywell HCD5HIH
- Page 1 ® EQUIP Series True Day/Night Network Box Camera NTSC / PAL HCD5HIH HCD5HIHX HCD5MIH HCD5MIHX HCD5WIH HCD5WIHX Reference Guide Document 800-07067V4 – Rev A – 11/2011...
- Page 3 Reference Guide...
- Page 4 Added a note in the IP installation section suggesting that all Norton AntiVirus software be disabled before installing the IP software. Added the information for installing the Honeywell IP Utility on Windows 7. And added Frame Rate to the list of available priority settings in the Compression Settings section.
-
Page 5: Table Of Contents
About the Honeywell IP Utility ........25... - Page 6 Appendix B HCD5HIH Specifications ....... . . 63 Appendix C HCD5MIH Specifications.
-
Page 7: Figures
Figure 3-2 Honeywell IP Utility Log On Window ......29 Figure 3-3 Honeywell IP Utility User Interface. - Page 8 Figures...
-
Page 9: Tables
Network Cameras Model Numbers....... 15 Table 3-1 User Profiles for Honeywell IP Utility and the Web Client ....26 Table 3-2 PC Minimum System Requirements . - Page 10 Tables...
-
Page 11: About This Document
HCD5 EQUIP Series True Day/Night Network Box Camera Reference Guide About This Document This document introduces the Honeywell HCD5 Series of High Resolution True Day/Night Network Box Cameras. This series includes the following cameras: • HCD5HIH(X) 1080p True Day/Night Network Box Camera •... -
Page 12: Cautions And Warnings
About This Document Cautions and Warnings Installation and servicing should be performed only by qualified and experienced technicians to conform to all local codes and to maintain your warranty. WARNING! 24V AC models require the use of CSA Certified/UL Listed Class 2 power adapters to ensure compliance with electrical safety standards. -
Page 13: Manufacturer's Declaration Of Conformance
Warranty and Service Subject to the terms and conditions listed on the Product warranty, during the warranty period Honeywell will repair or replace, at its sole option, free of charge, any defective products returned prepaid. In the event you have a problem with any Honeywell product, please call Customer Service at 1.800.796.CCTV for assistance or to request a Return Merchandise... - Page 14 About This Document Prior authorization must be obtained for all returns, exchanges, or credits. Items shipped to Honeywell without a clearly identified Return Merchandise Authorization (RMA) number may be refused.
-
Page 15: Introduction
Introduction Honeywell’s High Resolution True Day/Night Network Box Cameras provide high picture quality remote video surveillance over a network connection. See Table 1-1 for a list of camera models. Table 1-1 Network Cameras Model Numbers Model Number Description HCD5HIH True Day/Night 1080p Network Camera, NTSC... -
Page 16: Features
Introduction Features The Honeywell Megapixel IP Box Camera has the following features: Camera Resolution Progressive Scan Sensor HCD5HIH/X 1080p (1920 x 1080) 1/2.7" color CMOS HCD5MIH/X 720p (1280 x 720) 1/4" color CMOS HCD5WIH/X 720p (1280 x 720) 1/3" color CMOS •... -
Page 17: Installation And Setup
Before you install your IP box camera: • Please read this guide carefully. Keep this guide for future reference. • Before installing the camera, Honeywell recommends that you download the latest software updates. Go to www.honeywellvideo.com/support/ download-center/index.html and follow the instructions on the page to logon, find your camera, and then download the latest software updates. -
Page 18: Overview Of The Installation Procedure
13). Overview of the Installation Procedure This network camera is intended for indoor use only. If you choose to mount the camera outdoors, you must employ a suitable weatherproof enclosure (such as Honeywell’s HHC12 camera housing). See www.honeywellvideo.com for information on Honeywell weatherproof enclosures and mounting brackets. -
Page 19: Adjusting The Back Focus
Some installation codes state that the mounting bracket must be capable of supporting up to four times the combined weight of the camera and lens. For outdoor applications, mount the camera inside a weatherproof enclosure. See www.honeywellvideo.com for information on Honeywell weatherproof enclosures. Document 800-07067V4 Rev A 11/2011... -
Page 20: Wiring
Installation and Setup Figure 2-2 Camera Mount Use standard size mounting bolts (1/4 x 20) to mount the camera on a bracket or tripod. Wiring Figure 2-3 Camera Connections Analog video connection for a spot monitor 24V AC power Alarm input (maximum rated voltage level 24V DC) and output. -
Page 21: Connecting Power
® HCD5 EQUIP Series True Day/Night Network Box Camera Reference Guide Network RJ-45 Ethernet Connection The main video connection for your network camera will be made through your Ethernet network connection. Connect the Ethernet connector on the rear of the camera to your network using an Ethernet (10Base-T, 100Base-TX) cable. - Page 22 Installation and Setup Note If you are using PoE (802.3 af), power will automatically be supplied to the camera through the network cable. Plug in the power supply. Use a screwdriver to first loosen the ~AC24V terminal screws on the terminal block. Note To ease installation, the terminal block can be removed.
-
Page 23: Connecting Alarms
® HCD5 EQUIP Series True Day/Night Network Box Camera Reference Guide Connecting Alarms WARNING! Do not exceed the maximum rating of 12V DC, 0.5 A on alarm output connections. The network camera has one alarm input and one alarm output available to connect to peripheral devices (Figure 2-4). -
Page 24: Connecting Audio
Installation and Setup Figure 2-6 Alarm Output Connection – ALARM – The alarm output can be configured to provide normally open or normally closed contacts (see Alarm Settings on page to configure the alarm output). Contacts will be rated for 12V DC @ 0.5 A. -
Page 25: Installing The Honeywell Ip Utility And Web Client Software
About the Honeywell IP Utility and Web Client About the Honeywell IP Utility The Honeywell IP Utility is a software application that is installed from a DVD or downloaded from the Honeywell Systems Group website (www.honeywellvideo.com). It is installed on a local workstation and primarily used by Administrators to configure the ®... -
Page 26: About The Web Client
Configure compression settings. • Configure alarm and audio settings. User Profiles: Honeywell IP Utility and Web Client Both the Honeywell IP Utility and the web client have two user types: Administrator and Guest as described in Table 3-1. After the IP Utility software is installed, you can change the Administrator or Guest passwords. -
Page 27: Step 1: Confirm Your System Requirements
Contact the network administrator if there are any questions regarding the local area network (LAN) or any other network related issues. Install the Honeywell IP Utility on a work station with the minimum requirements (outlined Table 3-2). After the IP Utility is installed, the same computer workstation can be used to access the web client. -
Page 28: Step 2: Install The Honeywell Ip Utility Software
Contact information is found on the Download Center page. Log into the Download Center. Click Cameras under Video Systems Products. Under Honeywell IP Utility, download, extract and click to download the latest Honeywell IP Utility Set-up software. When the Honeywell IP Utility InstallShield Wizard opens, follow the instructions. -
Page 29: Downloading The Equip Series Installation Guides
Programs Honeywell Video Systems IP Utility Honeywell IP Utility. The Honeywell IP Utility Log On window opens. Figure 3-2 Honeywell IP Utility Log On Window Select Administrator or Guest from the User Name drop-down list. Document 800-07067V4 Rev A 11/2011... - Page 30 During the installation set up, you must log on as an Administrator to access all the features. Click the arrow button The Honeywell IP Utility program searches for devices on the network and opens to the Honeywell IP Utility user interface. Automatically discover or manually refresh the list of devices on the network.
-
Page 31: Step 4: Connect To A Device And Configure Network Settings
® HCD5 EQUIP Series True Day/Night Network Box Camera Reference Guide Figure 3-3 Honeywell IP Utility User Interface Refresh button Use the Product Filter drop-down Connect button menu to select a specific device, HCD5 series such as all cameras. Disconnect button... -
Page 32: Connecting To Or Disconnecting From Devices
Installing the Honeywell IP Utility and Web Client Software You can also manually refresh the device discovery by clicking the Discovery icon ( located near the top of the Discovery pane. Connecting to or Disconnecting from Devices Before configuring the IP network settings, you must connect to an IP device. -
Page 33: Figure 3-4 Setting The Ip Network Settings Automatically Or Manually
Option Description Device Name By default, the device name is the device type plus the MAC Address. Honeywell recommends, for security, that you change the device name. IP Address The IP address of the device on the network.The camera obtains an IP address by static or dynamic (automatic) means. - Page 34 Installing the Honeywell IP Utility and Web Client Software Updating IP Network Settings Automatically In the Discovery pane, select the device and click Connect From the System tab click the Obtain an IP Address automatically check box. Enter a Device Name, for example, FrontLobbyCam01.
-
Page 35: Interfacing With The Equip Psia Device Via A Network Video Recorder
It is important to click Apply in order to save any configuration change. Log onto the web client. There are two ways to launch the web client and log on— via the Honeywell IP Utility Program or directly from Internet Explorer. Honeywell IP Utility Log onto the Honeywell IP Utility program. -
Page 36: Figure 3-5 Activex Prompt
Figure 3-5 ActiveX Prompt Click Yes. Follow the InstallShield Wizard prompts to install the secure Honeywell IP ActiveX on your PC. The InstallShield Wizard Completed message indicates a successful ActiveX upgrade. Click Finish. The web client interface opens and live streaming video displays on the monitor. -
Page 37: Uninstalling Ip Utility, Bonjour Or The Activex Plug-In Software
The Honeywell IP Utility is uninstalled. During the uninstallation process, you are prompted to also uninstall the Bonjour program. Click Yes to remove Bonjour or No to only uninstall the Honeywell IP Utility. Click Finish. Uninstalling IP Utility or IP ActiveX Using the Control Panel ... - Page 38 Installing the Honeywell IP Utility and Web Client Software...
-
Page 39: Ip Camera Web Client
IP Camera Web Client Before you launch the Honeywell IP web client, ensure that you complete the following sections before configuring your HCD5 series camera: • Chapter 2, Installation and Setup • Chapter 3, Installing the Honeywell IP Utility and Web Client Software This chapter covers: •... -
Page 40: User Profiles
The default Administrator password is Only one Administrator can be logged in at a time. • The default Guest password is guest. Click The Honeywell IP Utility program searches for devices on the network and opens to the Honeywell IP Utility user interface. -
Page 41: Figure 4-1 Launching The Web Client From The Ip Utility
® HCD5 EQUIP Series True Day/Night Network Box Camera Reference Guide In the Discovery pane, double-click the device you want to connect to. -OR- Select the device and click Connect The network settings for the connected device are displayed in the System pane. Click Launch Browser (see Figure 4-1) to go to the web client logon page. -
Page 42: Logging Onto The Web Client From Internet Explorer
IP Camera Web Client Logging Onto the Web Client from Internet Explorer From Internet Explorer (v6.0+), enter the URL (IP address of the device) in the Address bar to open the logon window. The web client log on page opens. Select a User Name and enter a Password. -
Page 43: Navigating The Web Client User Interface
® HCD5 EQUIP Series True Day/Night Network Box Camera Reference Guide Navigating the Web Client User Interface Figure 4-2 Web Client Window Layout: Administrator Log On The URL corresponds to the IP Address as Click Logout to exit the program. configured in the IP Utility. -
Page 44: Live View
IP Camera Web Client Figure 4-3 Web Client: Administrator User The menu bar displays When an alarm is which user is logged on Click to select the detected, an alarm and provides a link to log video stream. message appears here out of the application. -
Page 45: Taking A Snapshot
Depending on the hardware installation, there is a tab called either Device Information or Device Settings. In both cases, the IP and Firmware Settings panel mirrors the information available in the Honeywell IP Utility. It provides read-only network settings, firmware settings, and video formats without having to access the IP Utility. -
Page 46: Resetting The Device
Firmware Settings including product name and version Video Output - Enable or disable local video out to a spot monitor. HCD5HIH(X) only. Note Enabling Local Video Out will disable to the secondary video stream. HCD5HIH(X) only. -
Page 47: Compression Settings
® HCD5 EQUIP Series True Day/Night Network Box Camera Reference Guide Compression Settings The video signal sent from the camera to the web client has a number of settings that can be edited which affect how the video displays in the web client. The Compression Settings view enables you to configure these settings: •... -
Page 48: Primary Stream Video Codec Settings
Secondary Stream Video Codec Settings Click on the Secondary Stream tab. A warning message appears: The secondary stream is disabled. To enable, select compression settings tab and configure secondary stream.(HCD5HIH only) You will have access to the Secondary Stream Video Codec Settings. Figure 4-9... -
Page 49: Table 4-3 Video Streaming Resolutions
Table 4-4 for the other compression settings. Table 4-3 Video Streaming Resolutions Primary Stream Resolutions Secondary Stream Resolutions 1920 x 1080 (HCD5HIH only) 640 x 360 1280 x 720 320 x 180 800 x 450 640 x 360 320 x 180... -
Page 50: Statistics: Received Bit Rate And Frame Rate
IP Camera Web Client Table 4-4 Compression Settings(cont’d) Setting Options Description Compression Minimum, Low, When Quality is selected as the Priority, select the Compression Ratio. Ratio Medium, High, Minimum is the highest visual quality; Maximum is the lowest visual quality. Maximum Target Bit 250 –... -
Page 51: Camera Setup
® HCD5 EQUIP Series True Day/Night Network Box Camera Reference Guide Deselecting the check box disables the refresh rate. Note The Received check box is disabled by default. When you log out, this check box reverts to the disabled state. Camera Setup The Camera Setup view provides access to the settings used to configure the camera configurations for both Primary and Secondary streams. -
Page 52: Table 4-5 Auto Exposure Settings
(neither too bright (HCD5MIH and nor too dark). HCD5HIH only) AGC (Automatic Gain Off, 20 dB–40 dB Adjust the maximum value of AGC gain. AGC can be Off, or set to Control) 20 dB, 30 dB, or 40 dB. -
Page 53: White Balance
® HCD5 EQUIP Series True Day/Night Network Box Camera Reference Guide Table 4-5 Auto Exposure Settings (cont’d) Setting Options Description DayToNight 1–7 Determines the low light detection level (1–7) when the camera switches to Night mode. The lower the value, the darker the lighting conditions before the camera switches. -
Page 54: Video Analytics
IP Camera Web Client Video Analytics Your camera can be configured to detect camera sabotage and motion within a scene via the Video Analytics view (see Figure 4-12). The Video Analytics tab enables a user to set the tamper detection threshold settings for blur, blinding and scene changes. Figure 4-12 Video Analytics Tab Each Tamper Detection... -
Page 55: Sabotage Detection
® HCD5 EQUIP Series True Day/Night Network Box Camera Reference Guide Sabotage Detection Figure 4-13 Tamper Detection Settings on the Video Analytics Tab Set the Blur Threshold. Blur can be affected by elements such as water, for example Set the Blinding Threshold. Blinding applies to obstacles in front of the camera lens Set the Scene Change... -
Page 56: Table 4-8 Blinding Threshold Values
IP Camera Web Client Note To turn off video blur detection, select Disable in the Blur Threshold list. Disable is the default value. Note You must click Apply after you make changes to any settings to save those changes. Settings are not saved unless you click Apply. Configuring Camera Blinding Detection An obstacle in front of the camera lens can blind the camera. -
Page 57: Configuring Video Motion Detection
® HCD5 EQUIP Series True Day/Night Network Box Camera Reference Guide Configuring Camera Field of View Change Detection The web client application can detect tampering of the camera field of view and show an alarm message above the video display (see Figure 4-14). -
Page 58: Figure 4-15 Video Analytics: Defining A Region
IP Camera Web Client Click and drag the box to resize and place it over the camera image. Select the sensitivity level (High, Medium, Low). Figure 4-15 Video Analytics: Defining a Region Region-defining box Note To disable a zone, click the VMD drop-down menu, then select Disable. -
Page 59: Alarm And Audio
® HCD5 EQUIP Series True Day/Night Network Box Camera Reference Guide Alarm and Audio Figure 4-16 Audio and IO Settings Tab Alarm Settings Connect external devices such as sirens or flashing lights to the alarm output connector to signal camera users that an alarm is activated. Set the Alarm Output as Normally Open or Normally Close. -
Page 60: Figure 4-17 Audio Settings
IP Camera Web Client Figure 4-17 Audio Settings To listen to or capture audio from the camera, enable the Camera to Client (PC) check box ). To listen to audio from the client (PC), enable the Client (PC) to Camera check box. -
Page 61: Appendix A Troubleshooting
Troubleshooting Technical Support Prior to calling Honeywell technical support, refer to the following topics for possible solutions to problems with your network camera. To contact the Honeywell Video Systems technical support team, call 1-800-796-2288 (North America only) or send an e-mail to HVSsupport@honeywell.com. -
Page 62: Problem: Web Client Does Not Display The Expected Video
Troubleshooting Problem: Web Client Does Not Display the Expected Video Possible solutions: • Ensure that your web browser settings have been configured to allow ActiveX controls (see Step 5: Launch the Web Client to View Live Video on page for information on setting up your browser). -
Page 63: Appendix Bhcd5Hih Specifications
HCD5HIH Specifications Note These specifications refer to all models, except where otherwise noted. Specifications are subject to change without notice. Video Signal Specifications NTSC Scanning System: Progressive Image Sensor: 1/2.7” CMOS Number of Pixels (H x V): 1920 x 1080 (HD) Minimum Illumination: 0.15 lux color @ 50 IRE, F1.2... - Page 64 , Windows 7 (32/64), Windows 2K8 (32/64), or WINServer 2003 Internet Explorer 6,7, or 8 Installation, Management, and Honeywell IP Utility software identifies the IP address, Maintenance: checks the status of the device. Firmware upgrades over HTTP, firmware available at www.honeywellvideo.com.
-
Page 65: Figure B-1 Camera Dimensions
® HCD5 EQUIP Series True Day/Night Network Box Camera Reference Guide Figure B-1 Camera Dimensions 5.34” (135.6 mm) 0.81” (20.6 mm) Document 800-07067V4 Rev A 11/2011... - Page 66 HCD5HIH Specifications...
-
Page 67: Appendix Chcd5Mih Specifications
HCD5MIH Specifications Note These specifications refer to all models, except where otherwise noted. Specifications are subject to change without notice. Video Signal Specifications NTSC Scanning System: Progressive Image Sensor: 1/4” CMOS Number of Pixels (H x V): 1280 x 720 (HD) Minimum Illumination: 0.15 lux color @ 50 IRE, F1.2 Video Output (local):... - Page 68 , Windows 7 (32/64), Windows 2K8 (32/64), or WINServer 2003 Internet Explorer 6,7, or 8 Installation, Management, and Honeywell IP Utility software identifies the IP address, Maintenance: checks the status of the device. Firmware upgrades over HTTP, firmware available at www.honeywellvideo.com.
-
Page 69: Figure C-1 Camera Dimensions
® HCD5 EQUIP Series True Day/Night Network Box Camera Reference Guide Figure C-1 Camera Dimensions 5.34” (135.6 mm) 0.81” (20.6 mm) Document 800-07067V4 Rev A 11/2011... - Page 70 HCD5MIH Specifications...
-
Page 71: Appendix Dhcd5Wih Specifications
HCD5WIH Specifications Note These specifications refer to all models, except where otherwise noted. Specifications are subject to change without notice. Video Signal Specifications NTSC Scanning System: Progressive Image Sensor: 1/3” CMOS Number of Pixels (H x V): 1280 x 720 (HD) Minimum Illumination: 0.15 lux color @ 50 IRE, F1.2 Video Output (local):... - Page 72 , Windows 7 (32/64), Windows 2K8 (32/64), or WINServer 2003 Internet Explorer 6,7, or 8 Installation, Management, and Honeywell IP Utility software identifies the IP address, Maintenance: checks the status of the device. Firmware upgrades over HTTP, firmware available at www.honeywellvideo.com.
-
Page 73: Figure D-1 Camera Dimensions
® HCD5 EQUIP Series True Day/Night Network Box Camera Reference Guide Figure D-1 Camera Dimensions 5.34” (135.6 mm) 0.81” (20.6 mm) Document 800-07067V4 Rev A 11/2011... - Page 74 HCD5WIH Specifications...
-
Page 75: Appendix E Glossary
Glossary AGC (Automatic Gain Control) Video Amplifier in a camera that boosts the amount of video gain (including the noise) to maintain a 1V p-p (1-volt peak-to-peak) video signal output. It becomes operational when the light level is low. The circuit is designed to compensate for fluctuations in scene illumination which would cause the video output level to be too low. - Page 76 Glossary PAL (Phase Alternate Line) A standard of specifications for television transmission for color TV signals used in West Germany, England, Holland, Australia, and several other countries. It uses an interlaced format with 625 lines per frame at 25 frames per second. PoE (Power over Ethernet) A method of powering Ethernet-connected devices via the Ethernet cabling as defined in the IEEE 802.3af standard.
-
Page 77: Index
® HCD5 EQUIP Series True Day/Night Network Box Camera Reference Guide Index DayToNight ActiveX control detect time administrator flickerless privileges administrator password, default NightToDay AGC (Automatic Gain Control) compression ratio, setting AGC (automatic gain control) compression settings 47, alarm configuration bit rate alarm output settings frame rate... - Page 78 web client and 35, IP Utility, logging onto EQUIP series manuals launch web client 31, 35, launching an IP web client features, camera launching the IP Utility field of view change limited/no connectivity button 31, finding installed user manuals live view tab firmware layout settings...
- Page 79 ® HCD5 EQUIP Series True Day/Night Network Box Camera Reference Guide thresholds, video analytics quality quality priority setting uninstalling, software upgrading firmware user manuals, how to find installed user profiles refresh button resolution resolution, setting video analytics tab format viewing live scene change threshold 54, video analytics security settings, ActiveX...
- Page 82 Document 800-07067V4 – Rev A – 11/2011 © 2011 Honeywell International Inc. All rights reserved. No part of this publication may be reproduced by any means without written permission from Honeywell. The information in this publication is believed to be accurate in all respects. However, Honeywell cannot assume responsibility for any consequences resulting from the use thereof.