Figure 4-17 Launching The Web Client From The Ip Utility - Honeywell HCD5HIH Reference Manual

Enable HTTP
Server must be
enabled. If it isn't,
the Launch
Browser button
might not be
available.
Document 800-07067V5 Rev A
07/2013
®
HCD5 equIP Series True Day/Night Network Box Camera Reference Guide
2. From the User Name drop-down list, select Administrator or Guest.
See Table 4-1 on page 40
3. In the Password field, enter the case-sensitive password.
The default Administrator password is 1234.
•
Only one Administrator can be logged in at a time.
• The default Guest password is guest.
4. Click .
The Honeywell IP Utility program searches for devices on the network and opens to
the Honeywell IP Utility user interface.
5. In the Discovery pane, double-click the device you want to connect to.
-OR-
Select the device and click Connect
The network settings for the connected device are displayed in the System pane.
6. Click Launch Browser (see
Figure 4-17 Launching the Web Client from the IP Utility
Note All examples in this User Guide show the GUI for the HCD5MIH(X) model
camera, unless otherwise specified. (IP Utility V1.0.1.45 or lower)
for User roles and privileges.
.
Figure 4-17) to go to the web client logon page.
Connect to the device then click
Launch Browser
53